Skip to main content ↑ ↓
Topic: Red door panels with cloth inserts (Read 475 times) previous topic - next topic

Red door panels with cloth inserts

Two Red door panels with cloth inserts. 

$50 or best offer + shipping

Located in Suffern, NY

Pictures upon request

Red door panels with cloth inserts

Reply #1 –
Photos of the passenger side door panel.

Red door panels with cloth inserts

Reply #2 –
Does anybody know if these will work on an 85 thunderbird?
===85BIRD===
:birdsmily:

Red door panels with cloth inserts

Reply #3 –
they should.... May need to drill holes for the placement of the clips though. And maybe lengthen the wires to the door locks depending on where yours were located. I had to do this putting 86 panels on my 85
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Red door panels with cloth inserts

Reply #4 –
Quote from: daminc;326698
they should.... May need to drill holes for the placement of the clips though. And maybe lengthen the wires to the door locks depending on where yours were located. I had to do this putting 86 panels on my 85


I aquired some 87-88 door panels in gray for my 84 and all of the panel clips line up perfectly to the holes in the door. The only thing I had to do was drill new holes for the pull strap screws to secure to the upper door since they are wider apart. Also, at the end of the door panel at the top, as an extra measure I ran a small screw through in the original location where the 87-88 cars do not locate a screw.

No modifications were needed for the door lock switch wiring as it is already the perfect length and the switches are located only a few inches below the original locations of the early 83-84 cars.

Red door panels with cloth inserts

Reply #5 –
I upgraded from that style to the premium TC style. that's why I needed more wire I think
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1
 

Red door panels with cloth inserts

Reply #6 –
Quote from: daminc;326719
I upgraded from that style to the premium TC style. that's why I needed more wire I think


Oh yeah that makes sense with the premium door panel trim.