Need H-Pipe Hanger

Topic: Need H-Pipe Hanger (Read 1942 times) previous topic - next topic

Re: Need H-Pipe Hanger

Reply #30 – April 28, 2005, 02:02:17 PM

This system fits together pretty well. It's all made by MAC, save for the headers, and there are no leaks when I use the stock H-pipe bracket. The only thing I'm worried about when I get the correct bracket is the driver side downpipe pressing against the shifter arm under there. There isn't much margin for error on that side.

Re: Need H-Pipe Hanger

Reply #31 – April 28, 2005, 02:11:19 PM

In that case you'll probably need to shave down that bracket a little. Either that, or mark the H-pipe, take it to an exhaust shop and have them dimple the pipe in that area. Or maybe both. You won't know until you know. :)

Re: Need H-Pipe Hanger

Reply #32 – April 30, 2005, 10:57:35 AM

jkirchman, to make up for the misunderstanding the other day. Here is some pics of an h-pipe hanger from an aod mustang, we did a aod to t5 swap on. Oh by the way the h-pipe was not hanging from the mount. I didn't mean I don't deal with the hangers, just I never use them, I just set the h-pipe rods on top of the cross member, works great. If this is the mount you are looking for, if you want I will trade you for the one you have, let me know. Herb :D

Re: Need H-Pipe Hanger

Reply #33 – April 30, 2005, 03:20:10 PM

Sorry about that Herb. I was cranky from being underneath the car for so long without getting anything done. Wasted time and energy.

That is exactly the mount I need. Unfortunately I mangled the one I have trying to grind it and drill new holes in it in a futile attempt to make it work so you probably don't want it. If you are willing to sell that one then I will gladly buy it from you.

Re: Need H-Pipe Hanger

Reply #34 – April 30, 2005, 09:27:25 PM

No problem, heck how does $15 shipped sound? :D

Re: Need H-Pipe Hanger

Reply #35 – May 02, 2005, 04:55:08 PM

That sounds great. Send me an email to let me know how I should pay. jkirchman@hotmail.com

Re: Need H-Pipe Hanger

Reply #36 – May 02, 2005, 05:34:22 PM

email sent, thanks.