Skip to main content ↑ ↓
Topic: Part needed (Read 379 times) previous topic - next topic

Part needed

Hi Everyone.
On my 85 TC,there is a part that I need.Not exactly sure what you call it,possibly a "filler" or a "seal",what it is, is it's a rubber strip that screws to the header panel where it meets the hood and fills the gap.It's held on to the header by about 8 screws.If you open the hood and look straight down,thats where it is.Figure shipping to 06320.
Many thanks,Joe
85 TC "Blackbird"


"As a matter of fact, I DO own the road!!!":birdsmily:

Part needed

Reply #1 –
i have a couple,but they fit on to tabs on the header panel (from an '87/'88).No screws.A rubber seal that would be seen between the hood and header.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Part needed

Reply #2 –
I think they are different from 83-86 and 87-88. Atleast the ones Ive seen.
1986 Cougar LS

Part needed

Reply #3 –
Quote from: DVP;318471
I think they are different from 83-86 and 87-88. Atleast the ones Ive seen.


They are different between 83-86 and 87-88. The 83-86 secures with screws. I'd offer mine up but I figure someone may want it with the purchase of my 83-86 header panel.
 

Part needed

Reply #4 –
Yep,you guys are right,they are different.And hard to find apparently.
Joe
85 TC "Blackbird"


"As a matter of fact, I DO own the road!!!":birdsmily: