Skip to main content ↑ ↓
Topic: Updated Pics!!!Thinking of painting my intake... (Read 2220 times) previous topic - next topic

Updated Pics!!!Thinking of painting my intake...

Reply #15 –
There's an upper and lower intake.Look at the picture of my engine on the first page of this thread,and you'll see how the upper intake goes over the driver side valve cover,and in my second pic,you can se the lower intake EASILY.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Updated Pics!!!Thinking of painting my intake...

Reply #16 –
Here is what i did ford blue on the intake and throttle body. Black on the valve cover, also sanded the ICM then clear coated it all. It aint the best but it will do untill i do a complete teardown and rebuild of the whole car.X

X

X

Updated Pics!!!Thinking of painting my intake...

Reply #17 –
I like the Ford blue idea;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.
 

Updated Pics!!!Thinking of painting my intake...

Reply #18 –
Quote from: daminc;314233
started mine. still getting the casting lines out.


You need to take that bracket thing off on the front of the intake. Also you can remove that vacuum fitting that faces forward on the lower front of the intake and plug the hole.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.