EVERYTHING to convert a 5.0 to serpentine drive

Skip to main content ↑ ↓

Topic: EVERYTHING to convert a 5.0 to serpentine drive (Read 534 times) previous topic - next topic

EVERYTHING to convert a 5.0 to serpentine drive

April 18, 2005, 05:11:32 PM

NEW Reman Motorcraft alternator, Good AC compressor, PS pump, idler pulley/bracket, underdrive (I believe) crank pulley, almost new aluminum water pump and pulley and the necessary brackets. $150 + shipping for everything, I can pull just the PS pulley of to save some weight, same for the AC compressor.

Re: EVERYTHING to convert a 5.0 to serpentine drive

Reply #1 – April 18, 2005, 07:40:34 PM

dood. you are the man. XD i need this!!!!! is the p/s pump for a 15:1 rack? i don't need the a/c compressor either. how much minus a/c and p/s pump? need the p/s pulley and bracket though. thanks.

Antonio.

Re: EVERYTHING to convert a 5.0 to serpentine drive

Reply #2 – April 18, 2005, 09:52:19 PM

! I'm gonna be packing a big box for you! lol
I don't know about the rack, it was a roller motor, but I don't know what from, since it was converted to carb.
Shoot me an email
ericchart@gmail.com