Skip to main content ↑ ↓
Topic: Cam swap: It doesn't end at the cam.... (Read 8684 times) previous topic - next topic

Cam swap: It doesn't end at the cam....

Reply #60 –
It's nice money for a few min of work. But it saves hundreds in the long run
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Cam swap: It doesn't end at the cam....

Reply #61 –
Quote from: V8Demon;279745
I don't feel like paying for a Lenco yet.  ;)

Teaser.....



How is your distributer boot so black? ;) Did you paint it?
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Cam swap: It doesn't end at the cam....

Reply #62 –
I did a dodge and burn on the jpeg but my boot IS blacker than most I see.....

Junkyard special -- $5. ;)
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Cam swap: It doesn't end at the cam....

Reply #63 –
According to my timing light, idle in park is 920-ish, 780 or so in drive.....The rev up is to 3500 RPM.

Enjoy!

http://www.youtube.com/watch?v=QhouoYcsDJI
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Cam swap: It doesn't end at the cam....

Reply #64 –
Sounds awesome paul. Whats your exhaust setup?
MODS: cone filter, no cat, flowmaster dumped, boost contoller, 4:10s

Cam swap: It doesn't end at the cam....

Reply #65 –
Mac equal length shorties & H-pipe, Borla XR1 lers dumped before the rear axle.  2.5" pipe.

I should add -- that was a dead cold startup.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Cam swap: It doesn't end at the cam....

Reply #66 –
That's a nice cold start, That improved on mine to. the e-cam I had would never idle on it's own when it was cold. did you make it idle that high?. I'm right at 800rpm it was set that way for the E-cam, I want to try and lower it . Good job sounds good.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Cam swap: It doesn't end at the cam....

Reply #67 –
Yeah I put the idle there.  MY issue was actually a hot start.  It will stay running, but will hunt if I go too much lower.  I could probably drop it 50 RPM....
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Cam swap: It doesn't end at the cam....

Reply #68 –
It's louder than mine ;) It sounds good :D
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Cam swap: It doesn't end at the cam....

Reply #69 –
Oil cooler on order from Summit.  Should be here Friday.  Dent removal guy comes tomorrow.  I pick up paint/primer and accessories  on Monday and some fun begins next weekend if all goes well :evilgrin:
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!
 

Cam swap: It doesn't end at the cam....

Reply #70 –
You're painting the car Barney purple right? ;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.