Skip to main content
Topic: clear coat peeling on wheels (Read 978 times) previous topic - next topic

clear coat peeling on wheels

Can anyone tell me how to remove the clear coat on my snow flake rims. it has stains, pits . 2 wheels are really good ,the other 2 are in fair shape.

clear coat peeling on wheels

Reply #1
i used what is called aircraft remover. It comes in a metal can, and it burns your skin! Be careful, but it works well(as long as you shake it). If you type jpc647 into cardomain, i have pictures posted of the before, during and after.

clear coat peeling on wheels

Reply #2
When I had mine,I smoothed them and polished them.They looked great.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

clear coat peeling on wheels

Reply #3
When I had the turbines, I used the aircraft remover and a lot of work.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

wheels

Reply #4
I found the aircraft stripper today. I comes in a thick antifreeze size bottle with a picture of a B-52 on the front. I tested a small corner of the wheel . I can tell it is strong stuff , the clear coat bubbled and smoked . Cant wait till I'm finished . Thanks people!

clear coat peeling on wheels

Reply #5
You might try doing this to them:

http://www.foxtbirdcougarforums.com/foxthundercats/tech/wheelrestoration.htm

I will be doing this to my snowflakes very soon...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

clear coat peeling on wheels

Reply #6
regardless, make sure to take pics before and after!

 

clear coat peeling on wheels

Reply #7
I always get it done with Castrol Super Clean! That Aircraft stripper works just very nasty stuff. Then depending on the finish you want you can just sand off the clear.

Stuckman.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird