Canton or Moroso oil pans ? November 28, 2008, 10:17:23 AM For those with swapped in engines, 351C's in particular, do the Canton or Moroso oil pans allow for much clearance above the stock K-member and power steering rack? This is in my 1987 TC.Chuck W mounts to hold the block at stock height, I assume. And I believe the sway bar has to be lowered about an inch. Quote Selected
Canton or Moroso oil pans ? Reply #1 – December 02, 2008, 10:02:08 PM anyone have this style pan that can measure the block mating surface to the bottom of the pan?I've posted on Stangnet with no results either. Quote Selected
Canton or Moroso oil pans ? Reply #2 – December 07, 2008, 09:41:37 PM I have a canton oil pan, but its on a 302 though...pretty good fit around the stock k-member, ample clearance.. Quote Selected
Canton or Moroso oil pans ? Reply #3 – December 10, 2008, 11:46:28 AM the moroso pan i bought for the 347 fit terrible. hit the pump, the pick up tube and the pickup screen. i finally got it to work after 'modifications'. i know i wont buy a moroso pan again. that was unforgivable. Quote Selected
Canton or Moroso oil pans ? Reply #4 – December 13, 2008, 05:44:31 PM My 351c morosopan worked awesome,it just cleared the rack. Oh and i have it for sale!!! Quote Selected
Canton or Moroso oil pans ? Reply #5 – December 14, 2008, 02:43:21 AM what about a Milodon Oil Pan on a 302 block? anyone used that?http://www.milodon.com/ Quote Selected
Topic: Canton or Moroso oil pans ? (Read 1975 times)
previous topic - next topic
