Skip to main content
Topic: Merry Christmas (Read 1875 times) previous topic - next topic

Merry Christmas

Reply #15
I hope I get Milf and cookies !!!!!!!!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Merry Christmas

Reply #16
:rollin: :rollin: :rollin:

MERRY CHRISTMAS EVERYONE!!!
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Merry Christmas

Reply #17
Now it's time for eggnog,,
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Merry Christmas

Reply #18
merry Christmas to all. i hope you remember the reason we
celebrate. i hope you keep Christ in Christmas.--irv and joyce

Merry Christmas

Reply #19
Merry Christmas !! :D
[SIGPIC][/SIGPIC]


Merry Christmas

Reply #20
Merry christmas to everyone!



Merry Christmas

Reply #21
Merry Christmas evryone and thanks for all the help...
[/IMG]
Just enjoyin the ride!!!!

Merry Christmas

Reply #22
The Grinch just gave me MY X-mas gift......

Dead dish washer......18 months old, not getting power, all house wiring good.....


[SIZE="5"]FFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!!!!!!!![/SIZE]

-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Merry Christmas

Reply #23
SO YOUR ARE!!!! getting power:D :rollin:

check the door latch.  there is a safety / mess prevention switch when you close it.
if that plastic part is worn, it wont make/break the switch but will still latch.

bypass it, this very thing happened to my whirlpool now running since 1976:flip:

Merry Christmas

Reply #24
tried it....no dice.....I'll start a separate thread.  A search shows I'm not the first person with this issue with this particular D/W.

It actually died mid-load.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

 

Merry Christmas

Reply #25
I JUST got off work.MERRY CHRISTMAS !!!!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..