Skip to main content ↑ ↓
Topic: Slopoke pics (Read 1849 times) previous topic - next topic

re:

Reply #15 –
Quote from: V8Demon;243625
Told ya ;)

 
If you're not running any type of crankcase ventilation, you're giving away power; lots of it @ high RPM's.....You running breathers or anything like that?





  Nope, just a fuel filter connected to the oil filler tube with a piece of rubber hose. It's not venting much if any at at all. The performer intake was a used piece. They broke the baffle off, along with the mounts, and plugged the pcv hole with a pipe plug. Drilling a hole in the left valve cover to fit a pcv grommet routed to an oil separator may be an option. A mechanical or electrical vacuum pump may be another option. Cost and delivery make those more difficult.
 I probably blew out the new rear main seal from that chicken $hit setup. :flame: :rollin:
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha