Skip to main content ↑ ↓
Topic: coilovers? (Read 711 times) previous topic - next topic

coilovers?

Just seen these in the new modified mustang and fords, would these work on our cars?
http://www.varishock.com/vas_library.html (8th one down)
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )
 

coilovers?

Reply #1 –
For the front suspension, the Mustang stuts are a little different but will bolt-in fit.  The rears are significantly different.  I think Chuck makes adapters to fit Mustang shocks to our platform.

OT, interesting that they recommend 250 lb/in for the fronts, I was thinking about going to that rate.
__________________
Twin '85 TCs
White/ Grey 2-tone
#1 (left): undergoing top-to-bottom rebuild     
#2 (right): DD, power everything (sorta)
[SIGPIC][/SIGPIC]