Skip to main content ↑ ↓
Topic: Quick clutch pedal assembly question..... (Read 1036 times) previous topic - next topic

Quick clutch pedal assembly question.....

On the assembly,there are two red wires on the left side,and two black wires on the right side.What are they for?I'm still unbolting everything to do the swap.I'll check for an answer to this in a little while.I'm out.Oh,one more thing,what is the vacuum hose for that is connected to the assembly?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Quick clutch pedal assembly question.....

Reply #1 –
The vacume hose is for the cruise control.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Quick clutch pedal assembly question.....

Reply #2 –
Man,I'm learning all kinds of things doing this swap.Thanks.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Quick clutch pedal assembly question.....

Reply #3 –
How do you adjust the hose "switch" to the right position?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Quick clutch pedal assembly question.....

Reply #4 –
Is it to where the button is depressed when the brake pedal is not in use,then when you push the brake,it lets the button out thereby turning the cruise off?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Quick clutch pedal assembly question.....

Reply #5 –
Quote from: vinnietbird;229039
Is it to where the button is depressed when the brake pedal is not in use,then when you push the brake,it lets the button out thereby turning the cruise off?


bingo....
 

Quick clutch pedal assembly question.....

Reply #6 –
I'll make the final adjustments tomorrow after work for that switch.Now,can you answer my other questions that I have on the drivetrain thread?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..