Skip to main content ↑ ↓
Topic: Wheel Bearing Dust Cap (Read 951 times) previous topic - next topic

Wheel Bearing Dust Cap

Does anyone know a specific part number for the wheel bearing dust caps on a 1993 mustang? I did the 11 inch brake conversion and no one seems to have dust caps that fit. If anyone has any part numbers for a dust cap that you know will fit 11 inch front brakes please let me know.
1987 Tbird 5.0 swap, go fast mods coming soon....

Wheel Bearing Dust Cap

Reply #1 –
the soruces I have says dorman/help 13975
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Wheel Bearing Dust Cap

Reply #2 –
Help section in autozone-I got some there last Sunday.
 

Wheel Bearing Dust Cap

Reply #3 –
as a footnote on spindal dust caps.

I drilled a tiny hole in each of mine so they are easier to put on.  They wanted to sort of pop themselves back off and i figured that a pin hole would allow the air to escape when i put them back on.  It works great by the way.  I dont know what size the bit was i used but it was very small.