Skip to main content ↑ ↓
Topic: What mods would I have to make... (Read 1174 times) previous topic - next topic

What mods would I have to make...

...if I picked up this exhaust for the V8 base model? I've heard that I would have to extend it in a couple places. Would it be worth it?

What mods would I have to make...

Reply #1 –
tips would come up short
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

What mods would I have to make...

Reply #2 –
You'll also need Mustang shorty headers. That H-pipe won't bolt up to your manifolds. Plus the pipes between the H-pipe and lers (Flow tubes?) will be too short (because of the longer wheelbase of these cars).
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

What mods would I have to make...

Reply #3 –
Well I can't see it, but it's as the others say except for my off road Hooker system... Turndowns are just right and the extension pipe had to be shortened a bit...

What mods would I have to make...

Reply #4 –
Thanks! How about the $500 price tag?

What mods would I have to make...

Reply #5 –
For $500.00 you should be able to buy headers,off road H or X pipe,lers and tails.Tips also.Get on Ebay and look around.Also,check the Corral,there's always good parts from those guys for sell cheap.I got my Flowmasters for $50.00.Not bad.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What mods would I have to make...

Reply #6 –
Quote from: vinnietbird;211645
For $500.00 you should be able to buy headers,off road H or X pipe,lers and tails.Tips also.Get on Ebay and look around.Also,check the Corral,there's always good parts from those guys for sell cheap.I got my Flowmasters for $50.00.Not bad.

 
But it is stainless,doesn't come cheap.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +
 

What mods would I have to make...

Reply #7 –
humm 500.... Idk looks like its a STOCK replacement system.... Guess it wouldn't be bad, just not throaty.
It is nice that its stainless....
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07