question on roller rockers March 10, 2008, 01:27:48 PM Hey guys, I had a question about changing my '87 3.8 rockers over to full rollers. Any problems with fitting the valve cover over them?Also, whats the deal with the shim kits available. Do these motors require the shims or is on a "as needed basis".I might not get to any motor mods this year since I want to get the body work done and primer applied. Thanks for ny info.I did go through Jcassities "how to" looking for anything. Thanks for all the info in there. What a great read that is. Thanks for taking the time to type that out. Quote Selected
question on roller rockers Reply #1 – March 17, 2008, 02:17:20 PM Good rockers on this site:http://www.krestsig.com/category.html?CategoryID=11.8 ratio for $350CDN.FYI the stock ratio on the 3.8 is 1.72 NOT 1.6!Shim kits are basically "as needed" I would buy a kit for safety's sake. On my old heads I upgraded to 1.72 ratio rockers for 1.6. I had to shim 1 of the intake valves....the rest were perfect and the lifter was not collapsed. Quote Selected
question on roller rockers Reply #2 – March 19, 2008, 02:02:17 PM thanks for the info. Quote Selected
Topic: question on roller rockers (Read 715 times)
previous topic - next topic
