Skip to main content ↑ ↓
Topic: 21 tooth speedo gear needed..... (Read 662 times) previous topic - next topic

21 tooth speedo gear needed.....

As the title states,I need a 21 tooth speedo gear.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

21 tooth speedo gear needed.....

Reply #1 –
I may have that Vinnie, Won't be able to check till monday.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

21 tooth speedo gear needed.....

Reply #2 –
A purple 21 tooth speedo gear is about $10 at the Ford dealer.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

21 tooth speedo gear needed.....

Reply #3 –
Thanks Kitz.

Thanks Thunderjet,but if I can get it a little cheaper,every dollar adds up to savings so I can SOME DAY get my seats re-done.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

21 tooth speedo gear needed.....

Reply #4 –
Vinnie, All the ones I have are white, and don't have 21 teeth....sorry            lopez

21 tooth speedo gear needed.....

Reply #5 –
No worries.I appreciate your time for looking.I had a couple of extras,but couldn't find them.Maybe I need to look again.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

21 tooth speedo gear needed.....

Reply #6 –
How does one figure out exactly which speedo gear they need? Is there a chart?

21 tooth speedo gear needed.....

Reply #7 –
There is a chart,but I don't remember where it is.I had this written down from when the 3.73 was an option a couple of years ago.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

21 tooth speedo gear needed.....

Reply #8 –
I checked it's a 20,sorry bud.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

21 tooth speedo gear needed.....

Reply #9 –
No worries,Kitz.I'll call Ford tomorrow.Thanks a lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

21 tooth speedo gear needed.....

Reply #10 –
Heh, I just went to the dealership last week and the purple 21 tooth was $1.50 I believe. I bought it, but I really need a 23 toother. Too bad I have to order it from somewhere(Lazy). Those, however, are not $1.50.
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...

21 tooth speedo gear needed.....

Reply #11 –
Thanks,I'll call them today.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

21 tooth speedo gear needed.....

Reply #12 –
I also paid less than $2 at my local Ford dealership.

D00Z-17271-B
.
1984 Thunderbird V8

 

21 tooth speedo gear needed.....

Reply #13 –
My Ford dealership said they couldn't get them,so,I found a brand new one on Ebay for $4.00 shipped.Thanks a lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..