Skip to main content
Topic: 84-86 bronco transmissions? (Read 1430 times) previous topic - next topic

84-86 bronco transmissions?

What kind of transmissions were in the 84-86 broncos? I have a whole new 5.0 and trans coming for 300 bucks from an old bronco. Not positive what year exactly it is. How hard would it be to swap to a C4? Would it be easier to go with a t5? I know I need a pedal and a clutch master cylinder for a manual trans. I`m looking for something a little stronger than the stock aod.
Children of Bodom!!!

84-86 bronco transmissions?

Reply #1
c6 or aod more than likely a c6.

84-86 bronco transmissions?

Reply #2
I have an 84 full size, and mine came with a stick. The original trans was a py 3 spd with an overdrive, it made the truck completely gutless. i just recently swapped in a New Process 435 with a granny low first gear. I think the first gear ratio is something like 6.72!! I have not got to drive it yet on this new transmition becasue I can not get the hydrolic clutch system to bleed properly for me. But it should be nasty when it does :D  Now, if you are meaning an auto trans, it should be an C6 unless it was swapped... you did not make it clear if it was manual or auto... HTH

Frank M.
http://www.cardomain.com/ride/665379

1983 TurboCoupe-T3 .60/.63, 3" exhaust, Motorsport front mount, PJ, large VAM, green tops, 8.8" w/ 3.55's, 13.72@97mph
1985.5 SVO
1984 Fullsize Bronco- 300, NP435

84-86 bronco transmissions?

Reply #3
Quote from: turbo83coupe;197406
i just recently swapped in a New Process 435 with a granny low first gear. I think the first gear ratio is something like 6.72!! I have not got to drive it yet on this new transmition becasue I can not get the hydrolic clutch system to bleed properly for me. But it should be nasty when it does
Frank M.


Yeah, you'll probably be able to get 15mph outta 1st...

84-86 bronco transmissions?

Reply #4
Quote from: TurboCoupe50;197473
Yeah, you'll probably be able to get 15mph outta 1st...



and pull a house doing it :evilgrin:    no, but I am very aware of how this transmition will be, my cousin had one similar (borg warner T-18)in an 82 F-250 mated to a 300 straight six. I was very happy with how it performed off road!! It will see allot of wheelin when its done ;)  pics will be posted when its together, i have some pretty neat stuff planned for it. Sorry for hijaking :cheers: .


Frank M.
http://www.cardomain.com/ride/665379

1983 TurboCoupe-T3 .60/.63, 3" exhaust, Motorsport front mount, PJ, large VAM, green tops, 8.8" w/ 3.55's, 13.72@97mph
1985.5 SVO
1984 Fullsize Bronco- 300, NP435

84-86 bronco transmissions?

Reply #5
My old '85 Bronco had a 351w 4bbl and a C6.

Quote from: turbo83coupe;197406
i just recently swapped in a New Process 435 with a granny low first gear. I think the first gear ratio is something like 6.72!!


My 81 F150 came with a 300 I6 and a NP435. You can pull anything with that setup, even with 200k + on the engine:hick: just not very fast.
The 351 adn C6 are now in the '81 and the Bronco was recycled
GT40p 5.0 w/ vortech @ 9.5psi, 400rwhp

84-86 bronco transmissions?

Reply #6
my 85 f150 4x4 has an AOD.  C6 if you had no OD.  The NP435 is indeed 6.72:1 in most versions.  1st will wind up in a hurry.  I love them though.  That  coupled with a NP208 in low will crawl pretty good for a stock drivetrain.
1987 TC

 

84-86 bronco transmissions?

Reply #7
I was told It`s an auto transmission.
Children of Bodom!!!