Skip to main content ↑ ↓
Topic: WTB. Floor Shifter (Read 404 times) previous topic - next topic

WTB. Floor Shifter

Shot in the dark.

I need a floor shifter for an 84 that reads PRND21.  Automatic. It is a rod type not cable.  However I don't need the rod, just the base plate.

Here's a pic of the piece I need.  Everything else I can take off and swap out.  I'll super glue the broken plastic piece if need be.

Also I'm interested in an after market floor shifter if you have one.  Anything to get this beast running.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB. Floor Shifter

Reply #1 –
That looks toasted. Maybe you could have it welded. Or is that plastic not metal.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

WTB. Floor Shifter

Reply #2 –
It's a cast piece.  I'll try my best to repair it.  Was hoping someone had one to replace it with.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB. Floor Shifter

Reply #3 –
Quote from: blu84302;187516
However I don't need the rod, just the base plate.

Let me check that shifter I have that's from the 86 XR7...I'll get pics if you want..?

Quote from: ipsd;187603
Or is that plastic not metal.

Cast aluminum
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6

WTB. Floor Shifter

Reply #4 –
Yeah, I'm needing one, even if i can fix the one i have.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB. Floor Shifter

Reply #5 –
I do believe that the 84 will have an C4 and the 86 will have and A4LD.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

WTB. Floor Shifter

Reply #6 –
If it says PRND21 and is a rod type, then it'll probably work.  Haven't figured all this out yet.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB. Floor Shifter

Reply #7 –
1987-88 TC = A4LD
1983-86 TC = C3

I'll also dig in my inventory and see what I can find. I've definitely got an A4LD base but not sure about a C3.

WTB. Floor Shifter

Reply #8 –
I know the one I have is from an '86 XR7, and it's the cable type.
pics:








sorry for the huge pics.
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6

WTB. Floor Shifter

Reply #9 –
That'll work.  How much do you want for it?
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB. Floor Shifter

Reply #10 –
Pm sent
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6
 

WTB. Floor Shifter

Reply #11 –
Yeah, I got one like that too - in pieces :hick:
11.96 @ 118 MPH old 306 KB; 428W coming soon.