Skip to main content
Topic: WTB: Tranny lines. (Read 460 times) previous topic - next topic

WTB: Tranny lines.

Tranny lines for a 5.0+AOD.  Brackets would be nice too. Must be located around central ohio.

If you have these or know of some then please let me know via PM.

-Johnny C
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB: Tranny lines.

Reply #1
I have a set out here in WA if you can't find any closer.

WTB: Tranny lines.

Reply #2
Give me a price shipped to 43130 please.  I doubt I will find any ASAP.

Thanks,
-Johnny C
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB: Tranny lines.

Reply #3
you know you can make your own and delete those metal fittings with the plastic inserts.

i have a set here you can have free but they both have brass splice's where the starter is located.  FIrestone in Richmond va cut em in half to remove the starter and didnt tell me,,,,i was smoking like wild by the time i charlottsville va and had to stop and tighten them.

WTB: Tranny lines.

Reply #4
I think I will have to make my own.  I'll look into it more.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB: Tranny lines.

Reply #5
I'm taking them off today. I caught a stupid cold last week and have been sidelined with a box of kleenex :(

I'll let you know by this afternoon what they look like.

WTB: Tranny lines.

Reply #6
I got them out. The long ones are perfect. The short little 90* ones on the trans are shot.

WTB: Tranny lines.

Reply #7
hum.... so the two lines from the radiator are good right?  Those are the two I could use.  Let me know if you're willing to ship and how much to 43130.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

WTB: Tranny lines.

Reply #8
Yes, the two lines to the radiator. They go to about 6" from the side of the transmission where there's 2 more lines that have a sharp 90* bend into the trans.

WTB: Tranny lines.

Reply #9
I've got a set, we're talking the two lines that run from the tranny to the radiator, right?

WTB: Tranny lines.

Reply #10
Yes.  Those are the two I need.  Can you ship?
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

 

WTB: Tranny lines.

Reply #11
Sure I can ship.... If I wrap the hell out of it with bubblewrap and send it FedEx, it will be about $10-$12 for two days... Make me an offer...