mass air October 09, 2007, 10:16:46 AM would there be any performance gains by switching to mass air??(upgrades are in my sig) Quote Selected
mass air Reply #1 – October 09, 2007, 10:30:33 AM Not based on the mods listed in your sig. You might even lose a little due to the restriction of the MAF. Quote Selected
mass air Reply #2 – October 09, 2007, 05:19:58 PM Use the money you have set aside for a mass air swap on an Explorer intake OR port the stock HO intake. Not worth the swap to mass air with your cam. With your 3.73's and 1.7 ratio rockers I'm sure your motor could use a little more breathing room as the RPM's climb. Quote Selected
mass air Reply #3 – October 09, 2007, 06:32:35 PM Quote from: V8Demon;181681Use the money you have set aside for a mass air swap on an Explorer intake OR port the stock HO intake. Not worth the swap to mass air with your cam. With your 3.73's and 1.7 ratio rockers I'm sure your motor could use a little more breathing room as the RPM's climb.He already has a Cobra intake;)Really with the mods you have you really won't see any improvement. Quote Selected
mass air Reply #4 – October 10, 2007, 05:49:13 AM thanks guys, i was just curious. would like to upgrade the cam and a set of trick flows later on and then switch to mass air, she runs to good now to tear right back into her Quote Selected
Topic: mass air (Read 821 times)
previous topic - next topic
