Skip to main content
Topic: Explorer short/long block maybe (Read 1706 times) previous topic - next topic

Explorer short/long block maybe

Reply #15
Should I just reuse whats on the car now? I havn't decided on mechanical or electric fuel pump, so whats on the car is fine. It's an older one with the cut out so I can use mech if i want, and a cover plate if I don't.

Explorer short/long block maybe

Reply #16
Ok, I may be way out on this, but IIRC some of the older 302 blocks are stronger than the newer roller types. You may have a stronger block to begin with. If you are staying carb, why change the motor and pull the efi? Is it more cost or labor effective?
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha

Explorer short/long block maybe

Reply #17
Your spot on.
 
I do have an older block for sure. Mid 70's. However the "guts" i have no clue. I don't know if its been bored out, stroked... what ever. A newer motor is just that, newer. Less miles, less wear ( how many people really abuse 5.0 explorers) and I can't see them being to expencive. If I buy the whole motor, i will part out the EFI stuff to make some of the money back off of it

Explorer short/long block maybe

Reply #18
do you have $5k for a crate motor? No.
have you ever swapped a motor? No.
do you have the tools to pull a motor? No.
do you have any reason at all to put more money into this car without a title? No.
are you a post w? Yes.


will someone please take away the "New Thread" button from him? :brick:
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


Explorer short/long block maybe

Reply #19
Quote from: 32VFoxBird;168059
do you have $5k for a crate motor? No.
have you ever swapped a motor? No.
do you have the tools to pull a motor? No.
do you have any reason at all to put more money into this car without a title? No.
are you a post w? Yes.
 
 
will someone please take away the "New Thread" button from him? :brick:
Do you have to be a complete asshole to everyone that askes a question. Read back, it say "PLANNING" and " Thinkin about"
Meaning I'm not doing this tomorow. It's down the road plans
 
Yes, I have put a motor in before. I put this motor in the car with the help of some freinds.
 
Jesus man, you piss and moan when I do stuff on my own and you complain when I ask questions.

Explorer short/long block maybe

Reply #20
Quote from: 84 Fila;168061
Do you have to be a complete asshole to everyone that askes a question. Read back, it say "PLANNING" and " Thinkin about"
 
Meaning I'm not doing it yet.
Jesus man, you piss and moan when I do stuff on my own and you complain when I ask questions.


was i wrong in my comment?
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


Explorer short/long block maybe

Reply #21
I think so. I hold the orignial title, i just need to change it over. I haven't done that as I have no reason. Not like I drive the car. I asked a serious question, on something I didn't know the answer to. People helped me, then you jump in with anotehr put down. Am I wrong for my comment?

Explorer short/long block maybe

Reply #22
a serious question? bullshiznit!

you've been on this site long enough to know, there's virtually no difference between the two motors. you had an explorer head thread like 2 months ago.

ill call bullshiznit again on the title, as last week you said what paper work you had was nowhere near a title.
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


 

Explorer short/long block maybe

Reply #23
That was for the TC parts car, not the Fila. I have all the Probate court papers that I need to transfer the title over. I just need to do so
 
I know they are the same motor, to an extent. I want to know how diferent they really are.
 
I belive the thread you are talking about was shoud I go EFI in the car.
 
I just wana learn a bit about the car and the motor that could go into it. I'm sorry if this makes you un-happy. Just don't read the thread