Skip to main content
Topic: Lentach transmission (Read 997 times) previous topic - next topic

Lentach transmission

Anyone know about these transmissions cause a guy I know has one sitting in his garage for a couple of years. He was holding it as a backup for his stang he said if it has 1000 miles on it its alot. I believe it’s the street terminator. He thinks it has a 2600-2800 stall converter on it. If that’s true is that to high for a TFS-1 cam.
And he’s wants 1500 for it firm watcha think cause I’m leaning towards buying it. Last question how much of an upgrade is this tranny over a stock AOD w/a transgo shift kit.

Lentach transmission

Reply #1
Go to clickclickracing.com and post that question there. IMHO Lentech's are very good transmissions, but very expensive.
That forum should tell you if it is worth it.
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha

Lentach transmission

Reply #2
With a converter.... Screamin' deal... I recommend a even higher stall but 2600/2800 is OK(I have a 2600, keep thinking I should have a 3200)

Lentach transmission

Reply #3
Lentech's are really good.  My buddy has the Street Terminator in his stang, and it is an animal now.  Go for it that is really cheap.

 

Lentach transmission

Reply #4
2800 will be nice.  It's what I have going in (still haven't done it).  My current one is a 2400 and is just below where I want it.....Just a little lag off the line.

Buy that transmission if it's in good shape and he'll back it up in case of any unforeseen issues.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!