Skip to main content ↑ ↓
Topic: Heater tubes needed.... (Read 428 times) previous topic - next topic

Heater tubes needed....

I need the heater tubes that run down the passenger side of the intake on a 5.0 (mine is an '88).No thread damage please.Good shape.If you have one,let me know and we can make a deal of some kind.Thanks.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Heater tubes needed....

Reply #1 –
Vinnie,Yuor really gunna owe me.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Heater tubes needed....

Reply #2 –
O.K.,I owe you.When you need anything,and I can get my hands on it,or,I already have it,it's yours.Fair is fair.You know where to find me.Gotta take care of each other.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Heater tubes needed....

Reply #3 –
Vinnie I don't have the tubes must of used them on mine.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Heater tubes needed....

Reply #4 –
It appears I still owe you,though.My search continues for the tubes.........The lever still helps a lot.I'm happy for any progress i can make.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Heater tubes needed....

Reply #5 –
Vinnie, I should have one for you if you can wait until around the 20th. Maybe not quite that long.

Heater tubes needed....

Reply #6 –
Thanks,I can wait.I'm still waiting on the lower intake from Fila anyway.I'm trying to gather all my parts so I can get this stuff done all at once.The car has been down for a couple of weeks waiting for parts.I should've left it together until I had everything I needed,but stuff happens,and here the Sport sits.Thanks again.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Heater tubes needed....

Reply #7 –
Vinnie: If you can't get a used one this guy has a NOS. check out his store, lots of 5.0 parts.

http://cgi.ebay.com/ebaymotors/86-93-Mustang-5-0-Engine-Heater-Tube-NOS-OEM_W0QQcmdZViewItemQQcategoryZ33601QQihZ017QQitemZ270076788125#ebayphotohosting

Rick
[SIGPIC][/SIGPIC]
1988 T/C body with a 5.0 transplant. Motor has a Vortech V-2 supercharger, Edlebrock Performer RPM II intake, heads, FRPP F-303 cam, Comp Cams roller rockers, Power Pipe, LMAF, full Mac exhaust, lowered, Koni's, 5 lug conversion, Cobra wheels, 13" Cobra brakes, etc.
SOLD September 2020. Will miss this car after 19 years of building/driving/showing it off. Time for a new chapter in my life.
Dynoed 446 horse/409 torque at the wheels.
2003 Tenth Anniversary Cobra Convertible. 1 of 369 Torch Red made.
2021 Chevrolet 3500 dually, crew cab Duramax.
 

Heater tubes needed....

Reply #8 –
Lopez is sending me one.I can't get one of those NOS ones because YOU have all my car money now.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..