SO to HO wiring harness, speed density

Topic: SO to HO wiring harness, speed density (Read 1685 times) previous topic - next topic

SO to HO wiring harness, speed density

February 01, 2005, 05:16:54 PM

I will be swaping my 88 302 SO T-bird motor with a 88 302 HO Mustang motor. I know I need another ECU for the different firing order but can I use my existing wiring harness and O2 sensors.

Re: SO to HO wiring harness, speed density

Reply #1 – February 01, 2005, 05:43:25 PM

Yep everything is identicle just plug and play!

Re: SO to HO wiring harness, speed density

Reply #2 – February 01, 2005, 05:44:22 PM

Yes you can use your T-bird harness without any changes since both motors you will be working with are speed density.

Check this page out for lots more info on the swap:
http://www.coolcats.net/tech/advanced/ho_swap.html

Re: SO to HO wiring harness, speed density

Reply #3 – February 03, 2005, 07:59:48 PM

How about the MAP sensor?

Re: SO to HO wiring harness, speed density

Reply #4 – February 03, 2005, 08:07:47 PM

non issue...plug and play

unless you meant MAF

then you need a 89 up 5.0 HO stang computer, MAF sensor and some wireing from what i understand.