Skip to main content ↑ ↓
Topic: Me and Bill got some work done! (Read 2226 times) previous topic - next topic

Me and Bill got some work done!

Reply #15 –
Quote
I think that Whipple's pulley is far too large


6 PSI is fine for now.  I'm right around 400 HP to the tires with this setup.

Eric, the body is steel.  Sadly, it has a GM motor lurking under the bonnet.  Like I said, If he's at Captree Sunday, I'll grab some more pics.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Me and Bill got some work done!

Reply #16 –
Need to turn the wick up on that...

The GTO made 411rwhp/430rwtq with a drop-in K&N and a tune...

:D

Me and Bill got some work done!

Reply #17 –
The dyno tune is in 2 weeks.  BTW 300 hp Mustangs smoke 350 hp GTO's all day long......
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Me and Bill got some work done!

Reply #18 –
No they don't. Because GTO's are 400HP :D (05's and 06's, the 04's are 350). We ran 13.34@108.2 dead stock. OE tires, spare in the trunk, paper air filter, factory oil, the works. Exactly how it drove off of the lot. A set of DR's nets 12.80's to go with the MPH. A tune drops it to 12.60's. We'll know for sure on the tune numbers by fall.

Your combo is good for 500+ rwhp if the ads are to be believed, and I'd LOVE to see that! The only 4.6's I like are blown/turbo'ed 3V/4V ones and the Whipple is one of my favorites. Plus I like that your keeping yours clean and a GT instead of ricing it out and turning into a confused horse of many names :hick:

Me and Bill got some work done!

Reply #19 –
I was speaking of the '04.  I am quite aware of the bigger motor installed in the '05 and '06 models, hence the reason I din't generalize and say just "GTO's"

FYI there are manual equipped BONE stock GT time slips at the time you've shown. Stop granny Shiftin!:hick: :hick: :D
 Like you said though, it don't take a lot to get alot more out of them (the GTO's that is).


Quote
Plus I like that your keeping yours clean and a GT instead of ricing it out and turning into a confused horse of many names


Thanks!
I wanted to keep the stock hood for another year and throw on a hood later, but that decision was taken out of my hands when a Jeep Wrangler with a rear mount tire backed into my parked and unoccupied Mustang creasing the hood.  The Steeda hood is on right now and SHOULD be getting painted as I type this (the body shop is a 5 minute WALK from my house!)

I had actually thought about different emblems for the side quarters.  The ones in the pic are what I would go with (with the red area painted blck for my car), but sadly I cannot find them anywhere........
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Me and Bill got some work done!

Reply #20 –
those look like old style gt elblems
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Me and Bill got some work done!

Reply #21 –
That's exactly right!  Someone makes new ones.  I just can't remember -- or find -- who.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Me and Bill got some work done!

Reply #22 –
http://www.scottdrake.net/prod_details.aspx?prod_id=3111&breadcrumb=Emblems+%26+Ornaments+%3a%3a+Exterior+Emblems+%26+Ornaments+%3a%3a+Fender+Emblem
stack those and it would be close
or theres these
http://www.scottdrake.net/prod_details.aspx?prod_id=2965&breadcrumb=Emblems+%26+Ornaments+%3a%3a+Exterior+Emblems+%26+Ornaments+%3a%3a+Fender+Emblem
and these
http://www.scottdrake.net/prod_details.aspx?prod_id=2747&breadcrumb=Emblems+%26+Ornaments+%3a%3a+Exterior+Emblems+%26+Ornaments+%3a%3a+Fender+Emblem



Thats the best i can do!
i had tons of mustang sites saved cause of my 66
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Me and Bill got some work done!

Reply #23 –
That may fit even better!  Looks easier to clean too!
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Me and Bill got some work done!

Reply #24 –
Looking good Paul wish I could have been there. Looking at the back round that place looks familiar.

Me and Bill got some work done!

Reply #25 –
Here are some old style GT emblems :D

1966
http://www.mustangsunlimited.com/itemdy01.asp?T1=C6OZ16098B+01&Category=Exterior+Trim&subCategory=Emblems&CatKey=EMUSTANG

Since you have an auto
http://www.mustangsunlimited.com/itemdy01.asp?T1=FE29+01&Category=Exterior+Trim&subCategory=Emblems&CatKey=EMUSTANG

1968
http://www.mustangsunlimited.com/itemdy01.asp?T1=FE30+01&Category=Exterior+Trim&subCategory=Emblems&CatKey=EMUSTANG

1967
http://www.mustangsunlimited.com/itemdy01.asp?T1=76098AB+01&Category=Exterior+Trim&subCategory=Emblems&CatKey=EMUSTANG

The one you really want
http://www.mustangsunlimited.com/itemdy01.asp?T1=C8ZZ1130EA+01&Category=&catkey=EMUSTANG
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.
 

Me and Bill got some work done!

Reply #26 –
thats why i couldn't find it its a wheel emblem!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07