How do I remove door lock actuator? April 11, 2007, 09:15:26 PM How does the door lock actuator come off? I need to replace my driver side door lock actuator and cant see any bolts holding it thanks. Quote Selected
How do I remove door lock actuator? Reply #1 – April 11, 2007, 09:29:22 PM if you look on the outside by the latch you will see a rivet, drill it out Quote Selected
How do I remove door lock actuator? Reply #2 – April 11, 2007, 09:45:03 PM Ok yea I saw the rivet and was not sure that it was for the actuator and how will I install the new one just with a bolt and nut? Quote Selected
How do I remove door lock actuator? Reply #3 – April 11, 2007, 09:48:08 PM I'd recommend using a rivet. A bolt/nut might back off (and it might be impossible to hold a nut on while trying to tighten it anyway) Quote Selected
How do I remove door lock actuator? Reply #4 – April 11, 2007, 09:59:37 PM Thanks for your help I really appreciate it. Quote Selected
How do I remove door lock actuator? Reply #5 – April 11, 2007, 10:05:03 PM forget drilling it out. The little motor has a tit on each side that has a rubber type thing on it. those rubbers are what hold the motor in place. That rivet only holds the bracket to the door. I just pop the lock motor out of the metal U shaped mount. No drilling and such. Quote Selected
How do I remove door lock actuator? Reply #6 – April 11, 2007, 10:05:44 PM Have a 1/4" bolt and nut on mine, no prob tightening it up(my bracket came loose from the rivet and assembly was just dangling by the motor shaft)... Used a locking nut with the nylon insert, installed bolt head out(showing), nut inside door... Quote Selected
How do I remove door lock actuator? Reply #7 – April 11, 2007, 10:18:23 PM Yes,what TC50 said.I did the same. Quote Selected
Topic: How do I remove door lock actuator? (Read 1244 times)
previous topic - next topic
