Skip to main content ↑ ↓
Topic: Converting to 5 lug (Read 1737 times) previous topic - next topic

Converting to 5 lug

Hey guys what is the cheapest way to convert to 5 lug? For the front I already have the mustang spindles and 5 lug rotors. For the rear end I got a 89 mustang diff 8.8 I heard ranger axles will work but not sure. Will any other axles from other cars be interchangable thanks guys lmk.
[SIGPIC][/SIGPIC]
87 T-Bird turbo'd and supercharged and if things call for it juiced. :evilgrin:
88 Turbocoupe t3, 4.10's, Daily driver

Re: Converting to 5 lug

Reply #1 –
Using the Ranger axles will pull the wheels in 3/4" on each side.  The 94-98 Mustangs axles are the same length as the TBirds.  I'm not 100% certain (haven't messed with drums on a Fox in a while), but I think the TBirds and Mustangs use the same drums, if that's the case, then you "should" be able to use the SN-95 Mustang axles and a pair of Ranger drums (you might need to turn down the "hub" on the center of the axles to fit the smaller holes in the drums)
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon
 

Re: Converting to 5 lug

Reply #2 –
Two right side Ranger axle shafts will work great.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..