Skip to main content ↑ ↓
Topic: I need a favor (Read 1108 times) previous topic - next topic

I need a favor

any of you got a 87-88 T/C  rear out of a car? i need a few measurements

rotor hat to rotor hat

and backing plate to backing plate.


if anyone could get me thses id appreciate it greatly.
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

I need a favor

Reply #1 –
I've got a TC rear sitting on jackstands in the garage. I'll try to get the measurement tomorrow. If I don't, remind me (I have a tendency to forget things like this)
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

I need a favor

Reply #2 –
Quote from: Thunder Chicken;113137
I've got a TC rear sitting on jackstands in the garage. I'll try to get the measurement tomorrow. If I don't, remind me (I have a tendency to forget things like this)



ok man thanks a ton
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

I need a favor

Reply #3 –
Thinking of throwing one under the ranger?  You could always use an explorer axle.  8.8 disks and 5 lug to boot.
One 88

I need a favor

Reply #4 –
Quote from: CougarSE;113203
Thinking of throwing one under the ranger?  You could always use an explorer axle.  8.8 disks and 5 lug to boot.



Possibly,Only reason i even considered it was i already have it. and the rear is already 5 lug
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

I need a favor

Reply #5 –
The measurements are:
 
Backing plate to backing plate: 55"
 to  (counting thickness of rotor as it's currently mounted on the ): 61"
Back of rotor to back of rotor: 56-3/4"
 
These measurements are all +/- 1/4" or so - it was difficult trying to get the measurements by myself as I had nobody to hold the other ned of the tape
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣
 

I need a favor

Reply #6 –
Quote from: Thunder Chicken;113243
The measurements are:
 
Backing plate to backing plate: 55"
 to  (counting thickness of rotor as it's currently mounted on the ): 61"
Back of rotor to back of rotor: 56-3/4"
 
These measurements are all +/- 1/4" or so - it was difficult trying to get the measurements by myself as I had nobody to hold the other ned of the tape


Thanks hopefully i can apply this in a usefull way ;)
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication