Skip to main content
Topic: headers and intakes (Read 636 times) previous topic - next topic

headers and intakes

i have 3 ho intakes and 3 sets of shortie stock headers, $20+ shipping for each intake or a set of headers... except the one intake that has the  ho tb/egr on it, thats $30 +shipping.

i also have a stock mustang h pipe with cats for $75  and stock mark7 h pipe with cats for $65 pluss shipping or possibly delivery up to certain distance with fuel and toll cost tacked on.

H-pipe with cats

Reply #1
Nate, I'd be interested in either h-pipe. Question is which would fit my 87 cougar? Also, are they in decent enough condition to help me pass emissions? I'm local so I'd pick up. Thanks, Crash
home ported E7's, HO intake, 93 Tbird cam, 65mm tb, Shorties, dynomax lers, TC 3.73 rear, Mach 1 springs, Bauman shiftkit, epoxy mod, SD, 3G alt, black magic fan

headers and intakes

Reply #2
wow, glendora, that towns like 3 blocks long lol. yeah both h pipes should let you pass. the mustang one is in better condition. if you dont already have shorties, you can get a set of the ones i have and then it will all bolt up. the only issue is if you have a column shift car, you may have to clearance something. im pretty sure i got it to work before, but its been so long,  lol.  the h pipes fit fine tho. then you can buy a mustang cat back for your car and legthen it  before the lers like 6" pluss like 10" on the tailpipes, or take it to someplace and have them make something for you, because exhaust shops are idiots and think that our cars can only have y-pipes showing up with a Hpipe already on the car should cut back on some of the confusion.

headers and intakes

Reply #3
Got a pic of those headers? I'd be interested in them and one of the intakes.

headers and intakes

Reply #4
hey crash have you ever come out for any of out TSTACC MEETS!    you should come out tomorrow night we usually meet around 9 ish  pm me if intersted and ill give you my cell to call or ask nate


headers and intakes

Reply #5
I might want a set of headers.

headers and intakes

Reply #6
i'll take pix when i get home from work sence it will be nice out today.

H-pipes

Reply #7
I think I'd take that mustang H-pipe. I have to jet but I'll PM you later with my home and cell number after work. Thanks.
Crash
home ported E7's, HO intake, 93 Tbird cam, 65mm tb, Shorties, dynomax lers, TC 3.73 rear, Mach 1 springs, Bauman shiftkit, epoxy mod, SD, 3G alt, black magic fan

headers and intakes

Reply #8
well i got one picture before my camera battery died, the axle is in good condition, you should replace the rotors and pads tho, i just stripped it down and checked the teeth on the ring and pinion, there arnt any chips cracks missing teeth or anything. spins freely, and the t loc works good. nothing is sloppy eather, all very tight. the pads are just thin, and the rotors are origional. the calipers arnt frozen and everything came appart nicely when i checked it.

 

headers and intakes

Reply #9
Gonna have to pass for now. Sorry.