Front end squeaking! September 12, 2006, 08:05:58 PM I just replaced my sway bar end-links with a set from Energy Suspension. The bushings are polyurethane. They seem to squeak a lot though...is this a known noise with new polyurethane bushings or is there something else I should be looking at?!?! Quote Selected
Front end squeaking! Reply #2 – September 12, 2006, 09:17:16 PM Grease on endlinks? I've never had that problem. Even with ES endlinks. Quote Selected
Front end squeaking! Reply #3 – September 12, 2006, 10:40:14 PM Quote from: Ether947;103708Grease on endlinks? I've never had that problem. Even with ES endlinks.White Lithium grease should more or less be a given when you mate Urethane to steel, at least in the case of endlinks and swaybar bushings. Quote Selected
Front end squeaking! Reply #4 – September 15, 2006, 02:28:41 PM I recently called Energy Suspension to see why my end-links would be squeaking and/or what I could do to keep them from squeaking. The customer service representative informed me that the set I bought from CH performance was actually the wrong set. Apparently CH Performance had a mismatch when they were listing their parts. The kit they sent me is for the 80-82 T-bird's. He checked the part number of the set I bought with the set I should be using and they're too long. He's sending me out the correct sleve and bolt size so hopefully this will correct my squeaking issues! Quote Selected
Topic: Front end squeaking! (Read 1106 times)
previous topic - next topic
