Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: svtbird on July 31, 2005, 04:03:21 PM

Title: Which mod should be next?
Post by: svtbird on July 31, 2005, 04:03:21 PM
Im replacing my motor because yest. I started it and it was ticking very loud and I looked at the oil gauge no presure. checked oil there was plenty. so I was wondering with my speed density set up which would yield more power for the buck. the venom chip or a cobra intake top and bottom.
Title: Re: Which mod should be next?
Post by: Ether947 on August 01, 2005, 02:43:42 PM
I'd go with the Cobra Intake of the two. Then some kinda head mod...
Title: Re: Which mod should be next?
Post by: Bob on August 01, 2005, 03:31:53 PM
no chips.. I run my combo with the stock computer and ignition system and it runs great

How about you buy an explorer or cobra intake and get a pair of good heads and do it all at once..
Title: Re: Which mod should be next?
Post by: 1badchicken on August 09, 2005, 06:00:16 PM
Not to get off the topic but,speeking of explorer intakes, I bought my 88 bird and the guy said he swapped out the factory intake with the explorer upper and lower. i have the factory intake as well. What is the visual difference, cause they look the same to me?
Title: Re: Which mod should be next?
Post by: Haystack on August 10, 2005, 10:06:11 AM
the explorer intake that you want looks like the cobra intake.
Text only | Text with Images