skip no fire on # 2 new injectors ,plugs, wires , coil pack, 150 lbs comp. noid light flashes 12 volts on red wire no resistance to the other wire on the connection of # 2 injector the trigger wire to complete the circut. Bad harness ??? or bad comp
Could be either... You could check the resistance on the wire back to the EEC to verify its circuitry. Or check at the output of the EEC(pin #59 for cyl #2) with the noid to see if it is firing. Since we don't deal with the Super Coupes, your best bet would be to check with these guys....
http://www.sccoa.com/