Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 11, 2013, 12:11:07 AM
Post by: 50RACER on December 11, 2013, 12:11:07 AM
I have one complete silver 88 Turbo Coupe and one 90% complete silver 88 Turbo Coupe that I am going to be parting out. I was originally going to combine the two cars due to rust issues in the complete one, but my plans have changed and I just need to get the space. I have lots of rust free body panels and doors in black, silver, and the light blue metallic. The car with the rust issues was a fully optioned car with leather, moonroof, etc. and it has 110,000 miles on it.
Let me know if there is anything you need. The cars are located in Northern Virginia.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 11, 2013, 12:13:20 AM
Post by: 50RACER on December 11, 2013, 12:13:20 AM
One thing that this car does have is a perfect dash that has not been covered.
Title: Parting out two 88 Turbo Coupes
Post by: 1BadBird on December 11, 2013, 01:23:49 AM
Post by: 1BadBird on December 11, 2013, 01:23:49 AM
Dang!! Wish you were closer. I'd like the sedate and door panels.
Title: Parting out two 88 Turbo Coupes
Post by: Pressure cooked chicken on December 11, 2013, 09:23:44 AM
Post by: Pressure cooked chicken on December 11, 2013, 09:23:44 AM
The one in the pics looks solid. Is it rusted out underneath?
Title: Parting out two 88 Turbo Coupes
Post by: STANG8U on December 11, 2013, 10:04:23 AM
Post by: STANG8U on December 11, 2013, 10:04:23 AM
Dose look like a clean car
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 11, 2013, 11:17:16 AM
Post by: 50RACER on December 11, 2013, 11:17:16 AM
It's a good 20 footer. Lots of rust underneath. Engine bay, k member, right front fender, rocker panels, bottom of doors, etc. It looks like the car must have spent most of its life stored inside where there was a lot of moisture. The rear looks like it has scales.
Title: Parting out two 88 Turbo Coupes
Post by: daminc on December 11, 2013, 05:11:17 PM
Post by: daminc on December 11, 2013, 05:11:17 PM
Quote from: 50RACER;425477
It's a good 20 footer. Lots of rust underneath. Engine bay, k member, right front fender, rocker panels, bottom of doors, etc. It looks like the car must have spent most of its life stored inside where there was a lot of moisture. The rear looks like it has scales.
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on December 12, 2013, 06:16:12 AM
Post by: ISTLCRUZ on December 12, 2013, 06:16:12 AM
You have PM.
Title: Parting out two 88 Turbo Coupes
Post by: jandmmustangs on December 12, 2013, 12:18:58 PM
Post by: jandmmustangs on December 12, 2013, 12:18:58 PM
I'm interested in the passengers side molding behind the rear tire. What's the price shipped to 19522
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 12, 2013, 12:37:12 PM
Post by: 50RACER on December 12, 2013, 12:37:12 PM
$35 for the rear passenger side molding shipped to 19522.
Title: Parting out two 88 Turbo Coupes
Post by: jandmmustangs on December 12, 2013, 06:13:23 PM
Post by: jandmmustangs on December 12, 2013, 06:13:23 PM
What's your PayPal?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 12, 2013, 11:42:51 PM
Post by: 50RACER on December 12, 2013, 11:42:51 PM
Quote from: jandmmustangs;425545
What's your PayPal?
Thanks!
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on December 14, 2013, 06:45:48 AM
Post by: ISTLCRUZ on December 14, 2013, 06:45:48 AM
Sent you PM....
Title: Parting out two 88 Turbo Coupes
Post by: fontana motorsports on December 15, 2013, 06:46:11 PM
Post by: fontana motorsports on December 15, 2013, 06:46:11 PM
interested in the steering wheel.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 15, 2013, 10:56:31 PM
Post by: 50RACER on December 15, 2013, 10:56:31 PM
I'll sell you the steering wheel without the horn button cover for $50 shipped to you. If you want the horn button, that will be another $40. This one is complete, in great condition with no broken tabs. I have another one that works, but has a broken tab and has been repaired to fit for $25.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 22, 2013, 05:55:54 PM
Post by: 50RACER on December 22, 2013, 05:55:54 PM
Just in case you all forgot about me. I still have lots of great parts. Let me know what you need.
Title: Parting out two 88 Turbo Coupes
Post by: poppop on December 23, 2013, 07:07:37 PM
Post by: poppop on December 23, 2013, 07:07:37 PM
How much for a hood?
Title: Parting out two 88 Turbo Coupes
Post by: jandmmustangs on December 23, 2013, 07:15:43 PM
Post by: jandmmustangs on December 23, 2013, 07:15:43 PM
This might be an odd one. Do you have a "turbocoupe" trunk lid emblem in good condition?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 23, 2013, 10:33:46 PM
Post by: 50RACER on December 23, 2013, 10:33:46 PM
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 23, 2013, 10:35:46 PM
Post by: 50RACER on December 23, 2013, 10:35:46 PM
I may have another. I'll have to wait until it gets light and see if the parts car I just bought has one.
Title: Parting out two 88 Turbo Coupes
Post by: Driverguy on December 24, 2013, 03:13:25 PM
Post by: Driverguy on December 24, 2013, 03:13:25 PM
the vertical bracket in the left hand side of the trunk, to hold the spare tire....is the one in your parts car any good? The one in my cougar is rotten out.
Title: Parting out two 88 Turbo Coupes
Post by: T-BirdX3 on December 24, 2013, 08:07:21 PM
Post by: T-BirdX3 on December 24, 2013, 08:07:21 PM
Do You Have A Passenger Door In The Baby Blue Color For The 87/88?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 24, 2013, 10:49:10 PM
Post by: 50RACER on December 24, 2013, 10:49:10 PM
Quote from: Driverguy;426181
the vertical bracket in the left hand side of the trunk, to hold the spare tire....is the one in your parts car any good? The one in my cougar is rotten out.
Yes, the ones in my Tbirds are all good. Those are welded in though aren't they?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 24, 2013, 10:58:47 PM
Post by: 50RACER on December 24, 2013, 10:58:47 PM
Quote from: T-BirdX3;426191
Do You Have A Passenger Door In The Baby Blue Color For The 87/88?
I sure do!!! Pretty sure the paint is good too! I know the paint is good, just not sure if there are any paint chips or anything. The car had been repainted and it looked good. No rust! $75. Come and get it. I am about 10 miles south of Manassas. All of the window and track are out of this one as well as the door lock actuator, but I do have other doors that we can steal the glass and tracks from. I have the drivers side also. Oh, and the door emblem is also gone.
Title: Parting out two 88 Turbo Coupes
Post by: kylesburrell on December 25, 2013, 12:03:39 AM
Post by: kylesburrell on December 25, 2013, 12:03:39 AM
Hi, does this car have an electronic climate control unit? If so, I am very interested in taking it off your hands!
let me know! thanks.
let me know! thanks.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 25, 2013, 01:06:35 AM
Post by: 50RACER on December 25, 2013, 01:06:35 AM
Quote from: kylesburrell;426197
Hi, does this car have an electronic climate control unit? If so, I am very interested in taking it off your hands!
let me know! thanks.
I have a couple of these systems. Are you looking for just the control panel or the heater box or both? Let me know and send me your zip code and I'll get you a shipped cost.
Title: Parting out two 88 Turbo Coupes
Post by: Driverguy on December 26, 2013, 01:13:02 AM
Post by: Driverguy on December 26, 2013, 01:13:02 AM
Quote from: 50RACER;426194
Yes, the ones in my Tbirds are all good. Those are welded in though aren't they?
Im not sure...i know the horizontal piece is welded, and the vertical piece is tack-welded to it...but the bottom of mine is completely gone, so I have no idea how it connects to the car, or if the spare tire well is the same on the thunderbird and cougar
Title: Parting out two 88 Turbo Coupes
Post by: kylesburrell on December 27, 2013, 07:59:11 PM
Post by: kylesburrell on December 27, 2013, 07:59:11 PM
im looking for the climate control unit that is located under the radio, and above the panel with the cigarette lighter. My zip code is 20124.
Title: Parting out two 88 Turbo Coupes
Post by: Ramos617 on December 27, 2013, 08:52:15 PM
Post by: Ramos617 on December 27, 2013, 08:52:15 PM
Do you have a good fuel rail from one of those turbo coupes?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 27, 2013, 10:41:16 PM
Post by: 50RACER on December 27, 2013, 10:41:16 PM
Quote from: Ramos617;426310
Do you have a good fuel rail from one of those turbo coupes?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 27, 2013, 10:45:26 PM
Post by: 50RACER on December 27, 2013, 10:45:26 PM
Quote from: kylesburrell;426308
im looking for the climate control unit that is located under the radio, and above the panel with the cigarette lighter. My zip code is 20124.
Title: Parting out two 88 Turbo Coupes
Post by: jandmmustangs on December 28, 2013, 07:54:43 AM
Post by: jandmmustangs on December 28, 2013, 07:54:43 AM
Did ya get a chance to see if ya have the other emblem?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 09:08:35 AM
Post by: 50RACER on December 28, 2013, 09:08:35 AM
Quote from: jandmmustangs;426330
Did ya get a chance to see if ya have the other emblem?
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on December 28, 2013, 09:26:06 AM
Post by: edgar_g1 on December 28, 2013, 09:26:06 AM
Is the weatherstripping good on either car? Also curious about the dew wipes, and moldings from both sides.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 10:08:16 AM
Post by: 50RACER on December 28, 2013, 10:08:16 AM
Quote from: edgar_g1;426336
Is the weatherstripping good on either car? Also curious about the dew wipes, and moldings from both sides.
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on December 28, 2013, 10:23:07 AM
Post by: edgar_g1 on December 28, 2013, 10:23:07 AM
I am looking to replace the window weatherstripping on both doors at the moment. Are those in good condition?
Title: Parting out two 88 Turbo Coupes
Post by: Ramos617 on December 28, 2013, 10:28:59 AM
Post by: Ramos617 on December 28, 2013, 10:28:59 AM
Quote from: 50RACER;426319
I answered your other post before I saw this one. Yes. I can ship you one for $30.
Pm me your paypal and I could send payment right over
Title: Parting out two 88 Turbo Coupes
Post by: jandmmustangs on December 28, 2013, 05:05:13 PM
Post by: jandmmustangs on December 28, 2013, 05:05:13 PM
What your price on the emblem?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 05:55:22 PM
Post by: 50RACER on December 28, 2013, 05:55:22 PM
Quote from: jandmmustangs;426357
What your price on the emblem?
How does $15 sound? I'll ship it Priority Mail.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 05:57:52 PM
Post by: 50RACER on December 28, 2013, 05:57:52 PM
Quote from: edgar_g1;426342
I am looking to replace the window weatherstripping on both doors at the moment. Are those in good condition?
Yes, I do have good weatherstripping for both doors. Both pieces for each door as a matter of fact. I just sold a set for both doors today for $40 shipped.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 06:00:40 PM
Post by: 50RACER on December 28, 2013, 06:00:40 PM
Quote from: edgar_g1;426342
I am looking to replace the window weatherstripping on both doors at the moment. Are those in good condition?
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on December 28, 2013, 06:13:18 PM
Post by: edgar_g1 on December 28, 2013, 06:13:18 PM
Is that the weather stripping that the window slides in?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 06:28:32 PM
Post by: 50RACER on December 28, 2013, 06:28:32 PM
Quote from: edgar_g1;426365
Is that the weather stripping that the window slides in?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 28, 2013, 11:43:37 PM
Post by: 50RACER on December 28, 2013, 11:43:37 PM
Quote from: Driverguy;426181
the vertical bracket in the left hand side of the trunk, to hold the spare tire....is the one in your parts car any good? The one in my cougar is rotten out.
Take a look at the pics and let me know which parts you want and well take it from there. These are good. A little minor surface rust on the bottom part. The pic and flash make it look much worse than it actually is. They are tack welded in so it will take a little effort to get them out, but I have the tools.
Title: Parting out two 88 Turbo Coupes
Post by: My10-80 on December 29, 2013, 12:41:59 AM
Post by: My10-80 on December 29, 2013, 12:41:59 AM
How much for a dual fan unit with fans attached. Shipped to 61261.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 29, 2013, 12:55:05 AM
Post by: 50RACER on December 29, 2013, 12:55:05 AM
Quote from: My10-80;426393
How much for a dual fan unit with fans attached. Shipped to 61261.
http://www.ebay.com/itm/191012739996?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Title: Parting out two 88 Turbo Coupes
Post by: Driverguy on December 30, 2013, 02:04:21 AM
Post by: Driverguy on December 30, 2013, 02:04:21 AM
Quote from: 50RACER;426389
Take a look at the pics and let me know which parts you want and well take it from there. These are good. A little minor surface rust on the bottom part. The pic and flash make it look much worse than it actually is. They are tack welded in so it will take a little effort to get them out, but I have the tools.
wow...why are you parting this car? looks in good shape compared to mine! So its just tack welded with that piece of foam behind it, seems like it would fit mine. if it doesnt take too much to pop it off, it would help me out. A couple other things im looking for that you might have;
full size spare tire cover/carpet bag
mini spare tire
woodgrain stereo trim for console car
console lid
lighted sunvisors
auto dim lightswitch
trim piece for under steering column
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 30, 2013, 09:49:44 AM
Post by: 50RACER on December 30, 2013, 09:49:44 AM
Ok, so you just want the vertical piece? Is that correct? What color visors are you looking for? Do they need to be for a sunroof car or non-sunroof? There is a difference. I have them both in the grey color. I have most everthing that you are looking for, but sending the spare tire to Canada, I am afraid would be very expensive. I recently shipped one to NY and that cost was $35.00. Oh, and the answer to parting out, I bought this car as a roller to transfer all my good stuff from the rust problem car, but life cirspoogestances have caused me to have to abandon that plan.
Quote from: Driverguy;426464
wow...why are you parting this car? looks in good shape compared to mine! So its just tack welded with that piece of foam behind it, seems like it would fit mine. if it doesnt take too much to pop it off, it would help me out. A couple other things im looking for that you might have;
full size spare tire cover/carpet bag
mini spare tire
woodgrain stereo trim for console car
console lid
lighted sunvisors
auto dim lightswitch
trim piece for under steering column
Title: Parting out two 88 Turbo Coupes
Post by: Driverguy on December 30, 2013, 05:36:09 PM
Post by: Driverguy on December 30, 2013, 05:36:09 PM
Quote from: 50RACER;426473
Ok, so you just want the vertical piece? Is that correct? What color visors are you looking for? Do they need to be for a sunroof car or non-sunroof? There is a difference. I have them both in the grey color. I have most everthing that you are looking for, but sending the spare tire to Canada, I am afraid would be very expensive. I recently shipped one to NY and that cost was $35.00. Oh, and the answer to parting out, I bought this car as a roller to transfer all my good stuff from the rust problem car, but life cirspoogestances have caused me to have to abandon that plan.
thats sad :/.
I have a shipping address in america, so none of this stuff needs to be shipped internationally.
I need brown visors, lighted, for a car without sunroof. If yours are grey, thats okay, the fabric can be changed and the plastic can be painted, or so I'm told. Same thing for the piece under the steering column.
also, I dont know if you have it, but i mentioned the carpeted bag/cover for a full size spare, that I sometimes see in these cars, do you have one of those?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 30, 2013, 07:22:42 PM
Post by: 50RACER on December 30, 2013, 07:22:42 PM
Look what I got! Send me a mailing zip code and I will get you some pricing and shipping costs.
Quote from: Driverguy;426464
wow...why are you parting this car? looks in good shape compared to mine! So its just tack welded with that piece of foam behind it, seems like it would fit mine. if it doesnt take too much to pop it off, it would help me out. A couple other things im looking for that you might have;
full size spare tire cover/carpet bag
mini spare tire
woodgrain stereo trim for console car
console lid
lighted sunvisors
auto dim lightswitch
trim piece for under steering column
Title: Parting out two 88 Turbo Coupes
Post by: My10-80 on December 30, 2013, 09:51:41 PM
Post by: My10-80 on December 30, 2013, 09:51:41 PM
This time, how much for the fog light wiring for both sides that have the factory plugs. I simply need the part that goes from fender area down to the fog lights, they are two wire harness. My wires were cut by previous owner for some strange reason. The wires are still there but were cut off at fender area. I could re wire but would prefer the factory plugs for the factory lights.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 30, 2013, 10:40:05 PM
Post by: 50RACER on December 30, 2013, 10:40:05 PM
How about $25 shipped.
Quote from: My10-80;426505
This time, how much for the fog light wiring for both sides that have the factory plugs. I simply need the part that goes from fender area down to the fog lights, they are two wire harness. My wires were cut by previous owner for some strange reason. The wires are still there but were cut off at fender area. I could re wire but would prefer the factory plugs for the factory lights.
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on December 31, 2013, 07:30:04 PM
Post by: ISTLCRUZ on December 31, 2013, 07:30:04 PM
Hey, 50...I need the screw covers or "caps" that go on the door pull handles in blue if you have them....
Title: Parting out two 88 Turbo Coupes
Post by: vinnietbird on December 31, 2013, 09:12:59 PM
Post by: vinnietbird on December 31, 2013, 09:12:59 PM
O.K., I may need that driver side trunk hinge after all. They really aren't very big when they are pulled. $45 shipped for both? Let me know. Just take them off at the spot welds and leave them in there little "brackets, and I'll cut them as I need to.
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on December 31, 2013, 09:25:04 PM
Post by: jcassity on December 31, 2013, 09:25:04 PM
50racer,,
do you have another set of fog lamps with harness?
do you have another set of fog lamps with harness?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 12:04:20 AM
Post by: 50RACER on January 01, 2014, 12:04:20 AM
Quote from: ISTLCRUZ;426558
Hey, 50...I need the screw covers or "caps" that go on the door pull handles in blue if you have them....
I don't have any blue ones. Sorry.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 12:06:36 AM
Post by: 50RACER on January 01, 2014, 12:06:36 AM
Quote from: vinnietbird;426561
O.K., I may need that driver side trunk hinge after all. They really aren't very big when they are pulled. $45 shipped for both? Let me know. Just take them off at the spot welds and leave them in there little "brackets, and I'll cut them as I need to.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 12:09:03 AM
Post by: 50RACER on January 01, 2014, 12:09:03 AM
Quote from: jcassity;426563
50racer,,
do you have another set of fog lamps with harness?
I have these aftermarket ones. No brand name on them, but they look correct and they use the same plug. I'll sell them for $40 shipped.
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on January 01, 2014, 06:26:00 AM
Post by: ISTLCRUZ on January 01, 2014, 06:26:00 AM
Quote from: 50RACER;426568
I don't have any blue ones. Sorry.
If you have them in "Raven' that may work also..Thanks
Title: Parting out two 88 Turbo Coupes
Post by: vinnietbird on January 01, 2014, 07:10:52 AM
Post by: vinnietbird on January 01, 2014, 07:10:52 AM
I think I do need them, but would need to know how much first. My budget after buying the trunk pieces and a new transmission are a little ....short.
LOL.
LOL.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 09:41:22 AM
Post by: 50RACER on January 01, 2014, 09:41:22 AM
Quote from: vinnietbird;426573
I think I do need them, but would need to know how much first. My budget after buying the trunk pieces and a new transmission are a little ....short.
LOL.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 09:44:19 AM
Post by: 50RACER on January 01, 2014, 09:44:19 AM
Quote from: ISTLCRUZ;426572
If you have them in "Raven' that may work also..Thanks
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on January 01, 2014, 10:30:40 AM
Post by: ISTLCRUZ on January 01, 2014, 10:30:40 AM
Quote from: 50RACER;426580
How many do you need? I know that I have 4 of them in the Raven color. I also have at least two of the red ones now since my latest acquisition.
How much for all 4 shipped? That way I will have some spares...Also do you have the light and harness that goes under the hood?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 10:38:13 AM
Post by: 50RACER on January 01, 2014, 10:38:13 AM
Quote from: ISTLCRUZ;426581
How much for all 4 shipped? That way I will have some spares...Also do you have the light and harness that goes under the hood?
Title: Parting out two 88 Turbo Coupes
Post by: vinnietbird on January 01, 2014, 08:47:27 PM
Post by: vinnietbird on January 01, 2014, 08:47:27 PM
Quote from: 50RACER;426579
Vinnie, I am not trying to be difficult, but trying to get these things out, at least at first glance looks like it could be rather challenging. So, how about this, I'll get one out (I've got air chisels and sawzalls etc,), tell you how much time I have in it based on $50 per hour and then we will go from there. Any shipping will simply be what it is. Does that sound fair? I thought getting the vertical spare tire bracket was going to be difficult, but it took me about 10 minutes.
Hang tight on that. I'll let you know very soon. Thanks a lot.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 01, 2014, 10:35:00 PM
Post by: 50RACER on January 01, 2014, 10:35:00 PM
Quote from: vinnietbird;426616
Hang tight on that. I'll let you know very soon. Thanks a lot.
Title: Parting out two 88 Turbo Coupes
Post by: vinnietbird on January 02, 2014, 06:47:08 AM
Post by: vinnietbird on January 02, 2014, 06:47:08 AM
It may not be worth your time. My budget dictates what I can spend, and that is $45.00 for a pair. I understand if that doesn't work for you. I know you gotta make money, too.
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on January 03, 2014, 05:55:58 AM
Post by: ISTLCRUZ on January 03, 2014, 05:55:58 AM
Quote from: 50RACER;426583
How about $35 for the 4 caps and the underhood light and harness shipped?
Payment sent...Got the other parts yesterday...Look great....Thanks for getting them out quickly...
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 06, 2014, 05:29:43 PM
Post by: ringosc on January 06, 2014, 05:29:43 PM
Do you still have the RH and LH door arm rest. I need 2 sets but I'll take what ya got.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 06, 2014, 07:20:50 PM
Post by: 50RACER on January 06, 2014, 07:20:50 PM
Quote from: ringosc;426887
Do you still have the RH and LH door arm rest. I need 2 sets but I'll take what ya got.
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 06, 2014, 08:32:55 PM
Post by: ringosc on January 06, 2014, 08:32:55 PM
I'll take just the pare of armrest pads.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 06, 2014, 11:18:57 PM
Post by: 50RACER on January 06, 2014, 11:18:57 PM
Quote from: ringosc;426898
I'll take just the pare of armrest pads.
Send me your zip and I'll get you a cost with shipping.
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 07, 2014, 01:00:28 PM
Post by: ringosc on January 07, 2014, 01:00:28 PM
61261
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 07, 2014, 10:37:14 PM
Post by: 50RACER on January 07, 2014, 10:37:14 PM
Ok, I'll get back to you tomorrow.
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 08, 2014, 11:04:07 AM
Post by: ringosc on January 08, 2014, 11:04:07 AM
ok
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 08, 2014, 05:05:20 PM
Post by: ringosc on January 08, 2014, 05:05:20 PM
Hey wondering if u could add one more thing. If one of your cars is auto, would you possibly have the trim that goes around the floor shifter. The tabs on mine are broke. Please and thank you.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 08, 2014, 09:42:33 PM
Post by: 50RACER on January 08, 2014, 09:42:33 PM
Quote from: ringosc;427000
Hey wondering if u could add one more thing. If one of your cars is auto, would you possibly have the trim that goes around the floor shifter. The tabs on mine are broke. Please and thank you.
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on January 08, 2014, 10:43:26 PM
Post by: edgar_g1 on January 08, 2014, 10:43:26 PM
Do you have rear seatbelts? Preferably tan/light brown.
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 08, 2014, 11:25:21 PM
Post by: ringosc on January 08, 2014, 11:25:21 PM
I'll just take the arm rest.
Title: Parting out two 88 Turbo Coupes
Post by: ringosc on January 08, 2014, 11:28:28 PM
Post by: ringosc on January 08, 2014, 11:28:28 PM
PM sent
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 09, 2014, 08:52:15 AM
Post by: 50RACER on January 09, 2014, 08:52:15 AM
Quote from: edgar_g1;427012
Do you have rear seatbelts? Preferably tan/light brown.
I have rear seat belts, but only in the raven charcoal grey color or red.
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on January 11, 2014, 12:01:24 PM
Post by: jcassity on January 11, 2014, 12:01:24 PM
hoping to gather up another list for you,, thanks!
if you have any "tan" color interior pieces, that would be nice to know about.
did i miss pics of these cars ?
if you have any "tan" color interior pieces, that would be nice to know about.
did i miss pics of these cars ?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 11, 2014, 02:29:27 PM
Post by: 50RACER on January 11, 2014, 02:29:27 PM
Quote from: jcassity;427158
hoping to gather up another list for you,, thanks!
if you have any "tan" color interior pieces, that would be nice to know about.
did i miss pics of these cars ?
I do not have any tan pieces. I have the dark grey and red interior pieces. If anyone is interested, I have dark grey dash that is perfect. No cracks.
Title: Parting out two 88 Turbo Coupes
Post by: creekcougar1988 on January 14, 2014, 08:10:39 PM
Post by: creekcougar1988 on January 14, 2014, 08:10:39 PM
Is the driver seat power if it is might be interested in front seats how much?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 15, 2014, 01:08:12 AM
Post by: 50RACER on January 15, 2014, 01:08:12 AM
Quote from: creekcougar1988;427329
Is the driver seat power if it is might be interested in front seats how much?
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on January 15, 2014, 02:50:58 AM
Post by: jcassity on January 15, 2014, 02:50:58 AM
if you end up tossing in the fog lamps in that box,, can you get the "car end" connector with a foot or so of wire,,,, if possible
Title: Parting out two 88 Turbo Coupes
Post by: creekcougar1988 on January 15, 2014, 02:49:33 PM
Post by: creekcougar1988 on January 15, 2014, 02:49:33 PM
If he doesnt get them i can come pick them up if reasonable price
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on January 16, 2014, 06:44:54 PM
Post by: edgar_g1 on January 16, 2014, 06:44:54 PM
Do you have the rear window defroster tab and harness from the tab to the main wire harness?
This is what the connector on the main harness looks like (I think that is the one).
As you can see, the tab broke off of the rear defroster. Looking to solder the tab and connect it back where it belongs.
This is what the connector on the main harness looks like (I think that is the one).
As you can see, the tab broke off of the rear defroster. Looking to solder the tab and connect it back where it belongs.
Title: Parting out two 88 Turbo Coupes
Post by: Erik J Designs on January 17, 2014, 09:05:53 PM
Post by: Erik J Designs on January 17, 2014, 09:05:53 PM
how much for the spindles and lower control arms? im in Atco NJ 08004
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 17, 2014, 10:22:22 PM
Post by: 50RACER on January 17, 2014, 10:22:22 PM
Quote from: Erik J Designs;427477
how much for the spindles and lower control arms? im in Atco NJ 08004
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on January 17, 2014, 11:10:19 PM
Post by: edgar_g1 on January 17, 2014, 11:10:19 PM
Any word on the defroster tab?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 17, 2014, 11:13:48 PM
Post by: 50RACER on January 17, 2014, 11:13:48 PM
Quote from: edgar_g1;427483
Any word on the defroster tab?
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on January 18, 2014, 12:48:16 AM
Post by: edgar_g1 on January 18, 2014, 12:48:16 AM
Roger, I will stand by.
Title: Parting out two 88 Turbo Coupes
Post by: Erik J Designs on January 18, 2014, 07:11:17 AM
Post by: Erik J Designs on January 18, 2014, 07:11:17 AM
I will let you know im going to hit up a u-pull it near by for the lowers since they are not different between turbo coupes and my bird, what about just the spindles?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 18, 2014, 08:43:03 AM
Post by: 50RACER on January 18, 2014, 08:43:03 AM
Quote from: Erik J Designs;427497
I will let you know im going to hit up a u-pull it near by for the lowers since they are not different between turbo coupes and my bird, what about just the spindles?
Title: Parting out two 88 Turbo Coupes
Post by: Erik J Designs on January 18, 2014, 10:14:32 AM
Post by: Erik J Designs on January 18, 2014, 10:14:32 AM
PMed
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 25, 2014, 12:08:11 PM
Post by: 50RACER on January 25, 2014, 12:08:11 PM
Quote from: creekcougar1988;427329
Is the driver seat power if it is might be interested in front seats how much?
The guy who has been interested in the leather interior has not yet come to get it. I'll make you the same deal as I was giving him. $300 for the front seats, (all power), rear seat and door panels. The door panels are missing the door lock switch panels, but otherwise are all there.
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on January 25, 2014, 12:38:39 PM
Post by: edgar_g1 on January 25, 2014, 12:38:39 PM
Any word on the defroster bit?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 25, 2014, 02:45:35 PM
Post by: 50RACER on January 25, 2014, 02:45:35 PM
Quote from: edgar_g1;427415
Do you have the rear window defroster tab and harness from the tab to the main wire harness?
This is what the connector on the main harness looks like (I think that is the one).
As you can see, the tab broke off of the rear defroster. Looking to solder the tab and connect it back where it belongs.
This thing is part of the trunk wiring harness that goes all the way from the trunk lights to near the fuse box before there is an actual plug to separate it. Do you want all of that? That is a lot of work to get what you want. Could you deal with me simply cutting the wires in the trunk area and your just using some method to reconnect them? Also, do you need the end that appears to be soldered to the rear window? If so, I don't know how successful I'd be at getting that, but I'll sure give it a try if that is what you need. Just let me know.
Thanks,
Bryan
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on January 25, 2014, 07:32:08 PM
Post by: edgar_g1 on January 25, 2014, 07:32:08 PM
I would need the end part that gets soldered to the window. In my car it had a small harness that went from the window into the connector previously posted (I think it was about 6-8 inches long) and a second wire that went to a nearby ground. If there is no plug next to the shock tower, I would appreciate enough wire to get it back to my connector.
Title: Parting out two 88 Turbo Coupes
Post by: 85cougar on January 27, 2014, 11:52:21 PM
Post by: 85cougar on January 27, 2014, 11:52:21 PM
Any pics of the bumper cover if you still have them?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 28, 2014, 12:37:40 AM
Post by: 50RACER on January 28, 2014, 12:37:40 AM
Quote from: 85cougar;428038
Any pics of the bumper cover if you still have them?
Title: Parting out two 88 Turbo Coupes
Post by: Erik J Designs on January 28, 2014, 10:24:54 AM
Post by: Erik J Designs on January 28, 2014, 10:24:54 AM
how much for the inside marker lights? My LH inside park lamp lost its lens.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 28, 2014, 10:33:28 AM
Post by: 50RACER on January 28, 2014, 10:33:28 AM
Quote from: Erik J Designs;428069
how much for the inside marker lights? My LH inside park lamp lost its lens.
http://www.ebay.com/itm/191050590974?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
I have this one listed on ebay. I also have the right side one listed, but there is a bid on that one already.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 10, 2014, 09:58:41 PM
Post by: 50RACER on February 10, 2014, 09:58:41 PM
Just giving myself a bump here. I am very motivated to sell the remaining parts from these two cars. I have a great TC 2.3 turbo motor with only 110,000 miles. I'd like to get $500 for it, but make me a reasonable offer. I also have the matching A4LD tranny that went with it. It appears that I need to move shortly and this stuff needs to go.
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on February 11, 2014, 09:58:55 AM
Post by: jcassity on February 11, 2014, 09:58:55 AM
need to get some of the stuff on the rear seat,, electronics wise ,,,,,****AND*********
all the relays you can find.
a bunch under the dash behind the radio area (fully loaded there should be six (would love to have that fancy mounting braket as well.,, one in the pass side trunk called fuel pump relay.
directly above to the side of th steering column there is another moutning braket with round canister type relays,, that as well.
think about how much then call or pm me.
all the relays you can find.
a bunch under the dash behind the radio area (fully loaded there should be six (would love to have that fancy mounting braket as well.,, one in the pass side trunk called fuel pump relay.
directly above to the side of th steering column there is another moutning braket with round canister type relays,, that as well.
think about how much then call or pm me.
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on February 11, 2014, 10:00:59 AM
Post by: jcassity on February 11, 2014, 10:00:59 AM
are any of these column shift?
reason is i have a wanted add for a shifter cable need but.. not sure the interchangeability to a 5.0.
would also need the mech linkage on the side of the transmission,, would in effect make the transmission harder to sell on your end.. so that may be out of the question
reason is i have a wanted add for a shifter cable need but.. not sure the interchangeability to a 5.0.
would also need the mech linkage on the side of the transmission,, would in effect make the transmission harder to sell on your end.. so that may be out of the question
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on February 12, 2014, 09:59:27 AM
Post by: edgar_g1 on February 12, 2014, 09:59:27 AM
Just wanted to see if you were able to see if the defroster wiring is useable. Also curious if it has electric mirrors in good shape.
Title: Parting out two 88 Turbo Coupes
Post by: custompunk on February 12, 2014, 02:45:27 PM
Post by: custompunk on February 12, 2014, 02:45:27 PM
Any snowflake center caps? Price for 1 or 2 of them? Willing to pay for super fast shipping if you have any, they will be painted so condition isn't a big issue.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 13, 2014, 12:26:12 AM
Post by: 50RACER on February 13, 2014, 12:26:12 AM
Quote from: custompunk;428811
Any snowflake center caps? Price for 1 or 2 of them? Willing to pay for super fast shipping if you have any, they will be painted so condition isn't a big issue. I have these listed on ebay. I will combine shipping for purchase of multiples.
http://www.ebay.com/itm/191013408138?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 13, 2014, 12:28:54 AM
Post by: 50RACER on February 13, 2014, 12:28:54 AM
Quote from: edgar_g1;428799
Just wanted to see if you were able to see if the defroster wiring is useable. Also curious if it has electric mirrors in good shape.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 13, 2014, 12:30:10 AM
Post by: 50RACER on February 13, 2014, 12:30:10 AM
Quote from: jcassity;428754
need to get some of the stuff on the rear seat,, electronics wise ,,,,,****AND*********
all the relays you can find.
a bunch under the dash behind the radio area (fully loaded there should be six (would love to have that fancy mounting braket as well.,, one in the pass side trunk called fuel pump relay.
directly above to the side of th steering column there is another moutning braket with round canister type relays,, that as well.
think about how much then call or pm me.
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on February 13, 2014, 03:59:20 PM
Post by: edgar_g1 on February 13, 2014, 03:59:20 PM
Thanks for the reply, I will be standing by.
Title: Parting out two 88 Turbo Coupes
Post by: phils88gt on February 21, 2014, 06:16:21 AM
Post by: phils88gt on February 21, 2014, 06:16:21 AM
I could be into an upper bumper, for a racecar. If it makes you feel better it is slated to makes some laps at Daytona this year. Are you near VIR?
I have no idea what they are worth, perhaps this forum can tell me. I am honestly a mustang guy.
Phil
I have no idea what they are worth, perhaps this forum can tell me. I am honestly a mustang guy.
Phil
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 22, 2014, 05:45:22 PM
Post by: 50RACER on February 22, 2014, 05:45:22 PM
Quote from: jcassity;428754
need to get some of the stuff on the rear seat,, electronics wise ,,,,,****AND*********
all the relays you can find.
a bunch under the dash behind the radio area (fully loaded there should be six (would love to have that fancy mounting braket as well.,, one in the pass side trunk called fuel pump relay.
directly above to the side of th steering column there is another moutning braket with round canister type relays,, that as well.
Well Scott, if this collection doesn't get your heart to racin', then I can't help you! :) I think I counted 47 total individual pieces. Make me an offer I can't refuse!!!
Title: Parting out two 88 Turbo Coupes
Post by: Erik J Designs on February 22, 2014, 09:31:26 PM
Post by: Erik J Designs on February 22, 2014, 09:31:26 PM
Do you still have a center console? shipped to 08004
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 22, 2014, 10:23:09 PM
Post by: 50RACER on February 22, 2014, 10:23:09 PM
I have this one listed on ebay. I also have a red one.
http://www.ebay.com/itm/191077590893?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
http://www.ebay.com/itm/191077590893?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on February 23, 2014, 08:24:53 AM
Post by: jcassity on February 23, 2014, 08:24:53 AM
pm sent,, will savor the goodies !!!
at least now i can share some of these in the next few years to come when someone needs them.
at least now i can share some of these in the next few years to come when someone needs them.
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on February 23, 2014, 08:26:54 AM
Post by: jcassity on February 23, 2014, 08:26:54 AM
nevermind my questions on the pm,,,
if all that is included, yeah im happy as a pig in shiznit~~!!
if all that is included, yeah im happy as a pig in shiznit~~!!
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 23, 2014, 03:20:44 PM
Post by: 50RACER on February 23, 2014, 03:20:44 PM
LOL!!! Yeah, I thought you would be!
Thank you!
Thank you!
Title: Parting out two 88 Turbo Coupes
Post by: RDOG on February 25, 2014, 03:35:40 AM
Post by: RDOG on February 25, 2014, 03:35:40 AM
lookiing for a 8UA ECU. You have one?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 25, 2014, 08:11:35 AM
Post by: 50RACER on February 25, 2014, 08:11:35 AM
No I don't. Sorry.
Title: Parting out two 88 Turbo Coupes
Post by: edgar_g1 on February 25, 2014, 10:04:47 AM
Post by: edgar_g1 on February 25, 2014, 10:04:47 AM
Sorry to keep bothering you, but were you able to get to the defroster wiring?
Title: Parting out two 88 Turbo Coupes
Post by: Ralph-O on February 25, 2014, 05:13:43 PM
Post by: Ralph-O on February 25, 2014, 05:13:43 PM
hey do you have a drivers fender with or without cornering lamps and the trim behind the rear wheels
Title: Parting out two 88 Turbo Coupes
Post by: Erik J Designs on February 26, 2014, 07:47:19 PM
Post by: Erik J Designs on February 26, 2014, 07:47:19 PM
Quote from: 50RACER;429300
I have this one listed on ebay. I also have a red one.
http://www.ebay.com/itm/191077590893?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
I just bid on it thanks it will work with what i'm building
Title: Parting out two 88 Turbo Coupes
Post by: StenholmEngineering on February 27, 2014, 04:29:55 PM
Post by: StenholmEngineering on February 27, 2014, 04:29:55 PM
Still have the tail lights? Price shipped for both to 06457
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 27, 2014, 04:35:17 PM
Post by: 50RACER on February 27, 2014, 04:35:17 PM
Quote from: StenholmEngineering;429709
Still have the tail lights? Price shipped for both to 06457
I only have one usable tail light for the right side and it has some rub marks on the corner that I believe can be easily buffed out and 1 barely noticeable hairline crack in the same general area. I will sell it shipped for $60.
Title: Parting out two 88 Turbo Coupes
Post by: StenholmEngineering on February 27, 2014, 04:38:07 PM
Post by: StenholmEngineering on February 27, 2014, 04:38:07 PM
Dang need a pair. What about power antenna??? Sorry I just got the car and things will just be popping in my head lol
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on February 27, 2014, 05:25:18 PM
Post by: 50RACER on February 27, 2014, 05:25:18 PM
Quote from: StenholmEngineering;429711
Dang need a pair. What about power antenna??? Sorry I just got the car and things will just be popping in my head lol
No antenae
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on March 01, 2014, 10:02:51 AM
Post by: jcassity on March 01, 2014, 10:02:51 AM
wish i knew what you still had..
some people keep a running talley on post 1
some people keep a running talley on post 1
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on March 04, 2014, 02:12:52 PM
Post by: jcassity on March 04, 2014, 02:12:52 PM
got the package,, thank you~!
your pm box is full
your pm box is full
Title: Parting out two 88 Turbo Coupes
Post by: StenholmEngineering on March 06, 2014, 07:15:42 PM
Post by: StenholmEngineering on March 06, 2014, 07:15:42 PM
Have either of the rear ends left?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on March 06, 2014, 07:24:49 PM
Post by: 50RACER on March 06, 2014, 07:24:49 PM
I actually do have one complete with a 3.73 but the outside is really scaley rusty. It has 110,000 miles on it. I have another with a 3.55 that needs axles, which I don't have and, calipers / rotors which I do have. I'll sell them both together for $150. Only catch is I am in VA and they will be gone to the s yard after this weekend. I have to move and they are not going with me. Wish I could, but I can't.
Title: Parting out two 88 Turbo Coupes
Post by: jcassity on March 06, 2014, 10:16:44 PM
Post by: jcassity on March 06, 2014, 10:16:44 PM
hate to hear this,, and im sure both cars are full of parts I wish I could get to.
that's why wish there was a better way to log parts or post what you still have.
don't let any of this stuff go s..
lights
center consoles
switches
easy trim
visors
mirrors
documentation found in the glove box,, bird or coug stuff
interior lights on the doors or dome
distributors
misc computors or electronics that you can easily snag out
TC hood scoops
over flow coolant tanks
door lock solenoids (not so quick to get to)
header panels If you can find room to store till sold.
that's why wish there was a better way to log parts or post what you still have.
don't let any of this stuff go s..
lights
center consoles
switches
easy trim
visors
mirrors
documentation found in the glove box,, bird or coug stuff
interior lights on the doors or dome
distributors
misc computors or electronics that you can easily snag out
TC hood scoops
over flow coolant tanks
door lock solenoids (not so quick to get to)
header panels If you can find room to store till sold.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on March 06, 2014, 11:58:27 PM
Post by: 50RACER on March 06, 2014, 11:58:27 PM
Quote from: jcassity;430188
hate to hear this,, and im sure both cars are full of parts I wish I could get to.
that's why wish there was a better way to log parts or post what you still have.
don't let any of this stuff go s..
lights
center consoles
switches
easy trim
visors
mirrors
documentation found in the glove box,, bird or coug stuff
interior lights on the doors or dome
distributors
misc computors or electronics that you can easily snag out
TC hood scoops
over flow coolant tanks
door lock solenoids (not so quick to get to)
header panels If you can find room to store till sold.
I have managed to keep most of the smaller parts that were already off the car. I do need to snag the last distributor though. I have not all, but most of the parts on your list.
Title: Parting out two 88 Turbo Coupes
Post by: creekcougar1988 on March 12, 2014, 06:11:11 PM
Post by: creekcougar1988 on March 12, 2014, 06:11:11 PM
How much for the seats and dash?
Title: Parting out two 88 Turbo Coupes
Post by: svtltd on March 28, 2014, 07:16:59 AM
Post by: svtltd on March 28, 2014, 07:16:59 AM
Price on complete engine wiring harness and ecu
Title: Parting out two 88 Turbo Coupes
Post by: MY83T on March 28, 2014, 08:25:01 AM
Post by: MY83T on March 28, 2014, 08:25:01 AM
Are these gone?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on March 28, 2014, 08:28:17 AM
Post by: 50RACER on March 28, 2014, 08:28:17 AM
Quote from: MY83T;431435
Are these gone?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on March 28, 2014, 08:29:31 AM
Post by: 50RACER on March 28, 2014, 08:29:31 AM
Quote from: svtltd;431434
Price on complete engine wiring harness and ecu
Title: Parting out two 88 Turbo Coupes
Post by: MY83T on March 28, 2014, 08:37:38 AM
Post by: MY83T on March 28, 2014, 08:37:38 AM
Quote from: 50RACER;431436
What are you looking for?
Radio/EQ combo (working)
Hood release (no broken mounting for the under dash mount)
Power antenna (working)
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on March 28, 2014, 08:47:00 AM
Post by: 50RACER on March 28, 2014, 08:47:00 AM
Quote from: MY83T;431438
Radio/EQ combo (working)
Hood release (no broken mounting for the under dash mount)
Power antenna (working)
The only part that I have that you are looking for currently is the premium radio, but although the radio works fine, the display on the radio does not.
Title: Parting out two 88 Turbo Coupes
Post by: phils88gt on April 03, 2014, 01:17:47 AM
Post by: phils88gt on April 03, 2014, 01:17:47 AM
I'm really interested in an upper bumper/header panel. Im just thinking shipping will totally kill me.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on April 03, 2014, 08:55:37 AM
Post by: 50RACER on April 03, 2014, 08:55:37 AM
I don't have one right now, but just FYI, I recently shipped a front fender from Virginia to Maine via Greyhound bus for $71 and it only took two days to get there. Only drawback is the seller has to take it to the station and the buyer has to pick it up at their nearest station, but shipping large items is reasonably priced.
Title: Parting out two 88 Turbo Coupes
Post by: Ralph-O on April 04, 2014, 09:12:53 AM
Post by: Ralph-O on April 04, 2014, 09:12:53 AM
do you have a 88 0r 87 fog light set up like wiring, switches and by the way thanks agin for the fender my car is now all back together and loving t
Title: Parting out two 88 Turbo Coupes
Post by: MY83T on April 04, 2014, 09:24:58 AM
Post by: MY83T on April 04, 2014, 09:24:58 AM
Quote from: 50RACER;431439
The only part that I have that you are looking for currently is the premium radio, but although the radio works fine, the display on the radio does not.
any shot you can send me a pic of the radio, and is there a premium sound amp? I need to figure out what i am missing on my XR-7 to make my EQ work. Thanks.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on April 04, 2014, 02:48:37 PM
Post by: 50RACER on April 04, 2014, 02:48:37 PM
Quote from: MY83T;431808
any shot you can send me a pic of the radio, and is there a premium sound amp? I need to figure out what i am missing on my XR-7 to make my EQ work. Thanks.
Title: Parting out two 88 Turbo Coupes
Post by: MY83T on April 04, 2014, 04:32:22 PM
Post by: MY83T on April 04, 2014, 04:32:22 PM
Quote from: 50RACER;431822
Ok, i think i def need the head unit, will the EQ plug and play into the radio without the premium sound amps etc? My door speaker grills do not have the Premium sound logos, so i am in the dark on this one. 83/84 i know up and down, the 87/88 cars is all new to me. The ECM won't direct swap either i think, right? Different setup if i remember.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on April 04, 2014, 05:48:36 PM
Post by: 50RACER on April 04, 2014, 05:48:36 PM
Quote from: MY83T;431830
Ok, i think i def need the head unit, will the EQ plug and play into the radio without the premium sound amps etc? My door speaker grills do not have the Premium sound logos, so i am in the dark on this one. 83/84 i know up and down, the 87/88 cars is all new to me. The ECM won't direct swap either i think, right? Different setup if i remember.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on May 04, 2014, 12:08:15 AM
Post by: 50RACER on May 04, 2014, 12:08:15 AM
Quote from: Ralph-O;431806
do you have a 88 0r 87 fog light set up like wiring, switches and by the way thanks agin for the fender my car is now all back together and loving t
Ralph, I have that fogl light wiring now. $45 shipped. That thing is a pain in the neck to get out. I just acquired another 87 TC parts car.
Title: Parting out two 88 Turbo Coupes
Post by: ISTLCRUZ on May 06, 2014, 05:51:57 AM
Post by: ISTLCRUZ on May 06, 2014, 05:51:57 AM
PM sent.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on May 06, 2014, 09:46:09 AM
Post by: 50RACER on May 06, 2014, 09:46:09 AM
Quote from: phils88gt;431725
I'm really interested in an upper bumper/header panel. Im just thinking shipping will totally kill me.
If you are still looking for a TC header panel, I just got an 87 TC parts car that has a great header panel. The color is the burgundy metallic if that makes a difference. I want $190 for it + shipping. If that sounds ok to you, let me know your address and I can get shipping for you. It's probably not as bad as you may think. I have shipped a few of these. Not that bad.
Thanks.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on May 06, 2014, 09:48:39 AM
Post by: 50RACER on May 06, 2014, 09:48:39 AM
Quote from: MY83T;431438
Radio/EQ combo (working)
Hood release (no broken mounting for the under dash mount)
Power antenna (working)
I now have a good hood release bracket and cable. I will sell it for $45 shipped.
Title: Parting out two 88 Turbo Coupes
Post by: kaseyp on July 15, 2014, 01:36:23 AM
Post by: kaseyp on July 15, 2014, 01:36:23 AM
i need automatic floor shifter assembly and will that be compatible with my 88 t-bird 5.0? (spent a bit on other places and never the right part or complete)
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 15, 2014, 07:55:32 AM
Post by: 50RACER on July 15, 2014, 07:55:32 AM
Quote from: kaseyp;435964
i need automatic floor shifter assembly and will that be compatible with my 88 t-bird 5.0? (spent a bit on other places and never the right part or complete)
Title: Parting out two 88 Turbo Coupes
Post by: john.marshall on July 15, 2014, 05:41:34 PM
Post by: john.marshall on July 15, 2014, 05:41:34 PM
I need the plastic cover that covers the slave cylinder on the bell housing on an 87 or 88 5 speed. Do you happen to have one?
Title: Parting out two 88 Turbo Coupes
Post by: marianadeeps on July 16, 2014, 10:35:21 AM
Post by: marianadeeps on July 16, 2014, 10:35:21 AM
I'm interested in the driver inside dew wipe and the right side tail light gasket (rubber that is inserted into top of the plastic tail light piece just below the trunk/body as it rounds the corner of the car). Also interested in the shifter if it is automatic.
Title: Parting out two 88 Turbo Coupes
Post by: marianadeeps on July 16, 2014, 10:38:34 AM
Post by: marianadeeps on July 16, 2014, 10:38:34 AM
Quote from: kaseyp;435964
i need automatic floor shifter assembly and will that be compatible with my 88 t-bird 5.0? (spent a bit on other places and never the right part or complete)
The automatic shifter assy is different between a turbo coupe and a 5.0. The turbo coupe has P R D OD 2 1, the AOD 5.0 has P R D OD 1
You have to find a donor 5.0 sport edition or a Cougar that has the floor shifter.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 16, 2014, 05:18:28 PM
Post by: 50RACER on July 16, 2014, 05:18:28 PM
Quote from: john.marshall;435988
I need the plastic cover that covers the slave cylinder on the bell housing on an 87 or 88 5 speed. Do you happen to have one?
John, I do have one. I'll ship it to you for $25.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 16, 2014, 05:22:05 PM
Post by: 50RACER on July 16, 2014, 05:22:05 PM
Quote from: marianadeeps;436009
I'm interested in the driver inside dew wipe and the right side tail light gasket (rubber that is inserted into top of the plastic tail light piece just below the trunk/body as it rounds the corner of the car). Also interested in the shifter if it is automatic.
Ok, don't have:
The inside dew wipe
The tail light gasket
I have an automatic shifter, but not interested in selling just the . I would rather sell the shifter as a complete unit. Just sold one for $65 + shipping.
Title: Parting out two 88 Turbo Coupes
Post by: CBASS on July 17, 2014, 11:28:03 PM
Post by: CBASS on July 17, 2014, 11:28:03 PM
Do you have many interior pieces left?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 17, 2014, 11:29:53 PM
Post by: 50RACER on July 17, 2014, 11:29:53 PM
Quote from: CBASS;436061
Do you have many interior pieces left?
Title: Parting out two 88 Turbo Coupes
Post by: CBASS on July 18, 2014, 10:16:13 AM
Post by: CBASS on July 18, 2014, 10:16:13 AM
I need a drivers arm rest and door courtesy light lens. This is on an 85 turbo coupe.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 18, 2014, 10:55:35 PM
Post by: 50RACER on July 18, 2014, 10:55:35 PM
The parts that I have are for 87-88. Not sure if the 85 is the same. I don't have the armrest, but I do have one of the red and white lenses.
Title: Parting out two 88 Turbo Coupes
Post by: CBASS on July 19, 2014, 11:09:28 PM
Post by: CBASS on July 19, 2014, 11:09:28 PM
Ok, I need the drivers side white lens.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 20, 2014, 07:51:03 AM
Post by: 50RACER on July 20, 2014, 07:51:03 AM
Quote from: CBASS;436120
Ok, I need the drivers side white lens.
Title: Parting out two 88 Turbo Coupes
Post by: john.marshall on July 24, 2014, 02:08:29 PM
Post by: john.marshall on July 24, 2014, 02:08:29 PM
I'll take the cover. Can you send me your PayPal account?
Title: Parting out two 88 Turbo Coupes
Post by: john.marshall on July 24, 2014, 07:12:54 PM
Post by: john.marshall on July 24, 2014, 07:12:54 PM
You wouldn't happen to have a lower shift boot? The rubber one that has the that bolts to the floor.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 24, 2014, 11:47:31 PM
Post by: 50RACER on July 24, 2014, 11:47:31 PM
Quote from: john.marshall;436336
You wouldn't happen to have a lower shift boot? The rubber one that has the that bolts to the floor.
Title: Parting out two 88 Turbo Coupes
Post by: john.marshall on July 25, 2014, 09:03:14 AM
Post by: john.marshall on July 25, 2014, 09:03:14 AM
The boot looks fine. I'll take it. Just let me know how much and I'll send you payment for it and the cover.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 25, 2014, 12:14:29 PM
Post by: 50RACER on July 25, 2014, 12:14:29 PM
Quote from: john.marshall;436368
The boot looks fine. I'll take it. Just let me know how much and I'll send you payment for it and the cover.
How about just another $10 to make the total $35.
thanks,
Title: Parting out two 88 Turbo Coupes
Post by: john.marshall on July 25, 2014, 12:57:59 PM
Post by: john.marshall on July 25, 2014, 12:57:59 PM
Bryan, payment sent.
Title: Parting out two 88 Turbo Coupes
Post by: GrowlXR7 on August 07, 2014, 05:52:38 AM
Post by: GrowlXR7 on August 07, 2014, 05:52:38 AM
Do you have the front spindle dust shields? And what kind of shape are they in?
Dave
Dave
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on August 07, 2014, 11:27:17 AM
Post by: 50RACER on August 07, 2014, 11:27:17 AM
I do have them! Besides some minor surface rusting and needing a good cleaning they are really in great shape. I'll ship them to you for $40.
Title: Parting out two 88 Turbo Coupes
Post by: JNX07 on November 12, 2014, 12:40:08 PM
Post by: JNX07 on November 12, 2014, 12:40:08 PM
Would you happen to have the window motors and regulators for both doors, by any chance?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on November 12, 2014, 06:52:21 PM
Post by: 50RACER on November 12, 2014, 06:52:21 PM
I only have a right side power window motor. I'll ship that to you for $20.
Title: Parting out two 88 Turbo Coupes
Post by: johnny on November 13, 2014, 12:36:26 PM
Post by: johnny on November 13, 2014, 12:36:26 PM
How much for the.hood or just the vents???
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on November 13, 2014, 02:20:08 PM
Post by: 50RACER on November 13, 2014, 02:20:08 PM
The hood vents are gone.
Title: Parting out two 88 Turbo Coupes
Post by: JNX07 on November 15, 2014, 11:50:28 AM
Post by: JNX07 on November 15, 2014, 11:50:28 AM
Darn. I found a couple places that sell the motors for a helluva lot cheaper than what auto part stores want, but regulators are apparently unobtainium.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on November 15, 2014, 02:17:48 PM
Post by: 50RACER on November 15, 2014, 02:17:48 PM
I had a bunch of doors, with the regulators in them, but I moved last march and couldn't take them with me. Had to s them. Hated to do that but not much choice.
Title: rear view Mirror
Post by: My10-80 on December 31, 2014, 09:52:51 PM
Post by: My10-80 on December 31, 2014, 09:52:51 PM
you don't by chance have a good rearview mirror without any black marks in the mirror? Shipped to 61261 if you do.
Thanks
John
Thanks
John
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on December 31, 2014, 10:20:18 PM
Post by: 50RACER on December 31, 2014, 10:20:18 PM
I don't have one that is perfectly clear. Sorry.
Title: Parting out two 88 Turbo Coupes
Post by: Driverguy on January 02, 2015, 06:00:37 PM
Post by: Driverguy on January 02, 2015, 06:00:37 PM
How is the condition of the console lid and switch panel?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 02, 2015, 11:04:45 PM
Post by: 50RACER on January 02, 2015, 11:04:45 PM
Quote from: Driverguy;442372
How is the condition of the console lid and switch panel?
Title: cruise control
Post by: flatdoc on January 05, 2015, 09:11:04 AM
Post by: flatdoc on January 05, 2015, 09:11:04 AM
Am interested in the cruise control servo and cable where it attached to the throttle linkage and what other attaching parts you are willing to spare. Let me know. Thanks Doug flatdoctor@frontier.com
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 05, 2015, 09:15:25 AM
Post by: 50RACER on January 05, 2015, 09:15:25 AM
I don't have the cruise control parts at this time. Sorry.
Quote from: flatdoc;442473
Am interested in the cruise control servo and cable where it attached to the throttle linkage and what other attaching parts you are willing to spare. Let me know. Thanks Doug flatdoctor@frontier.com
Title: Parting out two 88 Turbo Coupes
Post by: Lightningbird on January 06, 2015, 06:41:33 PM
Post by: Lightningbird on January 06, 2015, 06:41:33 PM
I would be interested in the dash, what is the going price?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 06, 2015, 07:40:52 PM
Post by: 50RACER on January 06, 2015, 07:40:52 PM
You are about 9 months late. I had to move last March, and my car had an absolutely perfect dash and I couldn't get anyone interested in it. It went to the crusher. I hated doing that but I had no choice. I don't have one at present.
Quote from: Lightningbird;442532
I would be interested in the dash, what is the going price?
Title: Parting out two 88 Turbo Coupes
Post by: Lightningbird on January 07, 2015, 02:13:01 PM
Post by: Lightningbird on January 07, 2015, 02:13:01 PM
You just physically wounded me..... I was deployed or would have easily came to pick it up. Please tell me it was not a two tone grey over charcoal.
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 07, 2015, 10:23:20 PM
Post by: 50RACER on January 07, 2015, 10:23:20 PM
Quote from: Lightningbird;442563
You just physically wounded me..... I was deployed or would have easily came to pick it up. Please tell me it was not a two tone grey over charcoal.
Title: Parting out two 88 Turbo Coupes
Post by: My10-80 on January 08, 2015, 03:46:11 AM
Post by: My10-80 on January 08, 2015, 03:46:11 AM
Is this the one for sale now?
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on January 08, 2015, 08:51:38 AM
Post by: 50RACER on January 08, 2015, 08:51:38 AM
No, that is the one from last year with the dash I hated to send to the s yard. The one that I have now has a cracked dash, but otherwise looks like this one. In fact, I put the leather interior from the car in the photo in the car that I currently have. I actually bought the interior back from a local guy that I had sold it to.
Quote from: My10-80;442583
Is this the one for sale now?
Title: oil supply
Post by: flatdoc on July 20, 2015, 03:11:52 AM
Post by: flatdoc on July 20, 2015, 03:11:52 AM
I'm Looking for the oil supply line for the turbo! it goes from the sender to the turbo and a bolts to the exhaust manifold!Do you have one or know where I can get one? Thanks Doug flatdoctor@frontier.com
Title: Parting out two 88 Turbo Coupes
Post by: 50RACER on July 20, 2015, 03:26:20 PM
Post by: 50RACER on July 20, 2015, 03:26:20 PM
No, I don't. Sorry.
Title: Parting out two 88 Turbo Coupes
Post by: Ramos617 on July 20, 2015, 04:40:33 PM
Post by: Ramos617 on July 20, 2015, 04:40:33 PM
Quote from: flatdoc;449880
I'm Looking for the oil supply line for the turbo! it goes from the sender to the turbo and a bolts to the exhaust manifold!Do you have one or know where I can get one? Thanks Doug flatdoctor@frontier.com
I'm going to have to recommend the stinger braided replacement
It's way easier to work with than the stock one