Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: 88'birdlover on February 17, 2009, 10:00:18 PM

Title: shorty headers???
Post by: 88'birdlover on February 17, 2009, 10:00:18 PM
trying to find a set of aftermarket headers for my '88 bird with a 3.8l v6 and having no luck... help please:flame:
Title: shorty headers???
Post by: wnt2gofst on February 17, 2009, 10:16:06 PM
good luck....get some stock manifolds off a 94+ mustang they give it a deeper tone and maybe a little power but not much or try this place http://www.moranav6racing.com/index.html
Title: have you
Post by: 88'birdlover on February 17, 2009, 10:32:16 PM
have you dealed with them before and what do i have to do with the ones off the 94
Title: shorty headers???
Post by: wnt2gofst on February 17, 2009, 10:44:09 PM
no never ordered anything from them and on the 94 man. there it a tube on the front of them that would need to be sealed off
and i dont know if these would fit in our cars but here are some more
http://www.macperformance.com/store/category.cfm?SID=3&Category_ID=478
Title: shorty headers???
Post by: CatCarMan2012 on February 18, 2009, 04:59:59 PM
I doubt they would mate up to a stock exhaust.  But, you wouldn't be putting headers on that asthmatic stock exhaust would you?
Title: shorty headers???
Post by: 88'birdlover on February 20, 2009, 12:08:41 AM
still looking and no i was going to put new  duals from flomaster or have a custom setup done
Title: shorty headers???
Post by: vinnietbird on February 20, 2009, 06:54:43 AM
I would think that the SN95 V-6 headers (factory headers) would work.Of course you'd have to modify the exhaust pipes as well,but that would have to be done to any of our cars that headers were installed on.
Text only | Text with Images