Text only | Text with Images

Fox T-Bird/Cougar Forums

General => Lounge => Topic started by: V8Demon on January 26, 2008, 03:01:02 PM

Title: Anybody know a good yet inexpensive sheetmetal guy?
Post by: V8Demon on January 26, 2008, 03:01:02 PM
An idea popped into my head...I'd need a custom adapter to mount any one of these:
http://cgi.ebay.com/ebaymotors/07-08-MUSTANG-SHELBY-GT500-USED-SUPERCHARGER-75_W0QQitemZ290201364885QQcmdZViewItem?hash=item290201364885

http://cgi.ebay.com/ebaymotors/03-04-COBRA-SUPERCHARGER-EATON-M1112-BLOWER-MUSTANG_W0QQitemZ260205068241QQcmdZViewItem?hash=item260205068241

http://cgi.ebay.com/ebaymotors/Mustang-Thunderbird-Supercharger-complete-kit_W0QQitemZ150209549479QQcmdZViewItem?hash=item150209549479

http://cgi.ebay.com/ebaymotors/Ford-3-8-supercharger-kit-mustang-eaton-90-HOT_W0QQitemZ250208836006QQcmdZViewItem?hash=item250208836006

http://cgi.ebay.com/ebaymotors/03-04-Mustang-Cobra-SVT-Supercharger_W0QQitemZ160201829389QQcmdZViewItem?hash=item160201829389

to a lower intake on a 5.0 (or perhaps something else:hick: )
Title: Anybody know a good yet inexpensive sheetmetal guy?
Post by: gumby on January 26, 2008, 03:28:03 PM
(http://i150.photobucket.com/albums/s97/justinb3325/_m112adapter11.jpg)
(http://i150.photobucket.com/albums/s97/justinb3325/m112upper09.jpg)

Quote
That is a custom CNC machined adapter to put a Lightning M112 Eaton blower onto a GT40 lower manifold. This was made by TJ's Performance (tjsperformance.com). If I go this route, I will modify the M112 to have a side entry instead of top. I dont think this setup will fit under an Explorer's hood with current throttlebody setup.

old thread, but looks like the same guy linked in the above quote
http://www.corral.net/forums/showthread.php?t=856359&highlight=M112+adapter
Title: Anybody know a good yet inexpensive sheetmetal guy?
Post by: P71 on January 26, 2008, 03:45:44 PM
http://www.magnusonproducts.com/

I know they make at least a 302/5.0 intake, and probably a whole lot more...
Title: Anybody know a good yet inexpensive sheetmetal guy?
Post by: V8Demon on January 26, 2008, 03:48:12 PM
Exactamundo the kind of work I was looking for, but I was wondering if anybody knew of anyone firsthand?  Maybe someone they had personally dealt with?
Title: Anybody know a good yet inexpensive sheetmetal guy?
Post by: Haystack on January 26, 2008, 08:56:48 PM
i'll bet you could simplify it alot by adapting it to a newer carb/throttle body upper... Might make it way to tall though...
Title: Anybody know a good yet inexpensive sheetmetal guy?
Post by: V8Demon on January 26, 2008, 09:13:55 PM
Quote from: Haystack;200109
i'll bet you could simplify it alot by adapting it to a newer carb/throttle body upper... Might make it way to tall though...



The idea is to make it fit UNDER my existing hood...EV-14 style injectors will have to be used...
Text only | Text with Images