If anyone needs anything,let me know and I'll write it down and look for it.As most here know,I try to be very fair on any pricing when I sell my parts.Please don't ask me to look for anything if you don't plan on paying for it.Friday evening is the cutoff for letting me know what you need,as I'm leaving very early Saturday morning.
Crown Vic Police Interceptor centercaps (the chrome ones), for an 01-02 (older and Rangers might work, 03+ will not). I
m willing to pay $25+shipping, if it's higher leave them.
Factory Ford CD player for 01 Crown Vic. I believe it's a double-DIN unit, take a look in some Grand Marquis. Again, not willing to pay more then $25 (I'll just get an aftermarket) for it.
Ford trunk emblem, same car. Not over $5.
99-08 Crown Vic front door moldings (wide flat ones that they put on the base models and CVPI's). MUST be very dark blue metallic! $25 or less for the pair.
Would you happen to know if there are any thundercats there with tan interiors? I'd love two seatbelt reciever covers, mine I think are in the condition typical of that item...bad. If you don't know would you mind looking?
if there are any mn12s there im gonna need a glovebox in blue. if you can score it off of a 90 xr7 then that would be sweet. let me know how much it will be.
All of it is noted.Anything else?
03/04 cobra front and or rear bumper cover ;0)
No problem,there's a row of Cobras and Shelbys on the back row.LOL.
hey, ya never know
Dood your sig is BA!
I want nothings... less you see an S197 GT there. lol.
Ummmm I'm guessing you were commenting on my sig and then involuntarily turned into a goat for a split second...?:wtf: Hmm....NOPE no other ideas too stupid right now.
:wtf:
BA = bad ass
Sorry, I sometimes forget not everyone listens to Dane Cook.
Hey Vinnie, if they've got a "top shelf", pull the whole thing!
Looking for 2-tone grey interior parts in superior-to-excellent condition compatible with 85TCs:
arm rests and visors (both sides), turn signal switch, center console sections (shifter, window controls), and (w.t.h.), door lock actuators (up to 4).
I sell new center console and door lock decals you know...
:D
Written down.
Michael, The DD's console control plate is fubar'd. A previous owner "fixed it" with some screws. It's going to take more than decals to fix it.
Vinnie, regarding the shifter console, I don't need the leather boot, just the plastic. Thanks!
Vinnie!!!
I forgot *the* most important things I need for the Vic! Rear door inner handles, cups, locks, brackets, rods, the works! (My doors just have big plates screwed over the holes). Willing to pay up to $40 for the pair of them!
Also, a driver's front door map pocket/kick panel (it comes off of the panel) in light-medium gray (mine's scuffed beyond repair by cop boots) for $10 or less.
I dunno, Im not digging the whole car-pulled-off-the-side-of-the-road pic. It kinda makes it look like youre broke down on the side of the road.
Mike,I can get all of those parts I believe,but not until next Friday.I know where they are at a different yard,and I'd bet I can get everything well within your budget.
Vinnie,
No rush (except the door handles!). If you can get it in under budget, I *will* take it! In fact, I need to add some things!
Rear seat center belt (both center belts) in gray, and the driver's front seatbelt (belt only, the buckles are in the seat) in gray. Willing to pay $10 on the rear and $20 on the driver's.
If you can find an 03+ MAF, air intake to the tb, and airbox... (PM on that one!)
Those parts I'll get at the other yard next week for you and make one big package for you.The door handles I'll grab tomorrow.How does $10.00 shipped for the handles sound?If I'm not back here tonight,go ahead and leave a message.I'll check this one more time before I go in the morning.
mustang axle shafts puhlease.
8.8's perferred
Great! I need all the hardware and door innards to go with them too! Also the locks! It is a cop car after all, can't have the prisoners escaping... :hick:
Oh,you need EVERYTHING with the handles.I see.O.K.,I'll see what they have and I'll get on it.
Well, I *think* I need everything... There's a metal plate covering the hole on the door panel, so I'm just covering my bases...
Mike,I'll be able to grab MOST everything you need on Friday.I'll be in touch and we'll get it shipped to you.
O.K.,if you got a PM,I got your stuff.If you didn't get a PM,I didn't find your stuff.Mike,Yours is Friday.