Fox T-Bird/Cougar Forums

Technical => Suspension/Steering => Topic started by: t3skidoo on November 23, 2007, 01:58:00 PM

Title: coil-over users
Post by: t3skidoo on November 23, 2007, 01:58:00 PM
What spring rates are you using, what car and application?

FYI I'm looking for a rate comparable to stock for a TC.
Title: coil-over users
Post by: JeremyB on November 23, 2007, 03:15:11 PM
Stock rate was ~415 lb/in up front and ~210 lb/in out back.

This would correlate to a ~115 lb/in coil-over spring in front and ~93 lb/in out back.

I currently have 275 lb/in coil-over springs in front with the factory springs out back. There is a definite mismatch between the front and rears.

The 275s up front are a lot stiffer than the factory springs, but they aren't really uncomfortable.
Title: coil-over users
Post by: t3skidoo on November 23, 2007, 04:04:59 PM
These guys have four choices, 12"/250s, 14"/175s, 14"/150s and no springs.

http://dynamicracingproducts.com/AutoPartsStore/product_info.php?cPath=1_18&products_id=214

As I understand it, 14" is a bit tall for a coil over spring?

Jeremy, what engine do you have?  Relocated battery?  Any other weight changes?

Thanks
Title: coil-over users
Post by: JeremyB on November 23, 2007, 07:10:01 PM
I have the CFI 3.8L with all the options still installed. Battery in factory location. 12" springs.
Title: coil-over users
Post by: gumby on November 23, 2007, 10:02:34 PM
400's, but im not goin for anything near stock rates ;)
Title: coil-over users
Post by: t3skidoo on November 24, 2007, 02:31:22 PM
Thanks for the feedback.