Skip to main content ↑ ↓

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - Chris F.

4
User Rides / 1988 Thunderbird V8 5.0L 40k Miles, new HO project!
Quote from: grutinator;207614
sweet looking bird. what wheels are those? the color looks off, but it looks clean. definatly post some more pictures with a digital camera


I have no clue what wheels they are, they were already on when my grandfather bought it from one of our neighbors like 8 years ago.
6
User Rides / 1988 Thunderbird V8 5.0L 40k Miles, new HO project!
Quote from: jncocowboyx;207503
for that much, you should be getting a pretty nice tranny with a shift kit.


Well I got two estimates one from Circle D here and houston, and then another called Carter Transmission. Circle D was $1,400 labor then depending on the parts it needs it could go up to $2,000
7
User Rides / 1988 Thunderbird V8 5.0L 40k Miles, new HO project!
Quote from: vinnietbird;207497
Get some more pics when you can,and let us know all the details of the car,and what you're plans are.


I should be able to take more pictures tomorrow when I get it back from the Transmission shop. Transmission had to be rebuilt, $1,650 :(.

@kitzdnm  It is red, the lighting was weird when I was driving so my phone made it look that color.
8
User Rides / 1988 Thunderbird V8 5.0L 40k Miles, new HO project!
Well, I have decided to convert to HO. But first my transmission needs to be fixed, and it is in the shop today for that. On the way I was able to take two pictures of the interior, when I get it back I will take more. Paint job is maroon/red, and the interior is the same color.







Quality of photos are not great right now. They were taken with my phone while driving to the transmission shop.

*New pic of the car, my camera phone sucks in the daylight, picked up a bad glare.

I am planning on buying the HO parts to convert it to a 5.0L HO V8, it only has 40k miles, so I do not want to do too much to it yet. Everything else in the car is pretty much stock, it has the floor shifter as well.
9
Engine Tech / 1988 5.0L HO Questions
Also another question, jumping a bit ahead of myself.

How much HP will be in the bird after the HO and Mass Air conversion? 225hp or more? And after conversion, if I wanted to hit 300hp, what would be the easiest thing to do?
10
Engine Tech / 1988 5.0L HO Questions
Quote from: 1WLD BRD;207157
yep, do both then, and use the A9L


Actually my transmission is an AOD, so would I use the A9P instead of the A9L?
11
Engine Tech / 1988 5.0L HO Questions
Quote from: ZondaC12;207161
HAH since no one has yet PLEASE post some pics of that thing in the User Rides forum! It must be just gorgeous.

Will do, hopefully my camera on my phone will be ok (3mega pixel). Like I said there are a few scratches here and there, mainly on the black molding, and the tint is starting to peel. Biggest thing that makes me upset the most is that the previous owner was an older lady who smoked, so in the passenger seat on the edge near the shifter, there is a pencil eraser sized hole where she burnt it. Other than that, the interior looks brand new.

Actually I should get it washed because it is real dusty, it has been sitting in the garage since Christmas because we haven't gotten the transmission fixed, but that is changing this week.
12
Engine Tech / 1988 5.0L HO Questions
Quote from: Tbird232ci;207142
It really depends on what your future plans are for the car.

If you want something a little peppy, and don't intend on doing much more, the HO swap with speed density would be great. You just need a computer from an 87-88 5.0 Mustang, and then the associated parts to convert it to HO, and you can consider it pretty much done. You're able to do all the smaller bolt ons with no issues, but anything significant will be difficult with speed density.

The mass air conversion is best if you plan on doing things such as heads, cam, forced induction, etc. This is essentially providing you with more potential. To do the mass air conversion, you need an adapter harness, which isn't very difficult or expensive, the 89-93 Mustang 5.0 computer, a mass air flow meter, a proper intake tube, and the rest of the HO conversion.


I do plan on doing additional modifications at a later date, so I guess I should do both the HO and mass air conversion, if so do I need the A9L ( I think that is it) computer?
13
Engine Tech / 1988 5.0L HO Questions
Quote from: V8Demon;207120
Please tell me you have a garage to keep it in or at the VERY least a car cover!


Yeah I keep it in the garage, that is where it has been for the past several years, and most likely why the fuel pump, AC, and transmission died. Paint job only has a few minor scratches, the most being on the black molding. The interior is pretty much brand new, only one person has sat in the back seats haha. BTW the paint is the maroon/red and same with the interior.
14
Engine Tech / 1988 5.0L HO Questions
Quote from: 1WLD BRD;207116
if you read the SO to HO swap info then the parts and computer you need are already listed....  Not sure what else you are looking for...


Bascily i was wanting to know what each seperate conversion provides HP wise, and if I do both at the same time is there anything special I shoul do? One thing I am a bit confused about is the computer for the HO and the computer for the mass air, if I am doing both conversions do I just use the mass air computer for the AOD?  ( sorry if this seems jumbled, i am typing this from my phone at work).
15
Engine Tech / 1988 5.0L HO Questions
Ok, I am not that  knowledgeable when it comes to cars, but I am trying to learn. My grandfather recently gave me his 1987 Thunderbird 5.0L, it currently has 40,600 miles on it. It recently had to have a new fuel pump, and AC, I guess from sitting in the garage for so long; and I am about to have its transmission rebuilt(or might just get a new one, it is AOD). Anyways I would like to convert the engine to HO and really do not have a clue where to start. I have been reading the articles about Stock to HO Conversions and Mass Air Conversion, and was wondering the differences and if I should do both. If so what type of computer should I use, and what type of parts do I need to obtain (I know, I have seen about 1,000 posts on this). Mainly, I just want to do the HO and Mass Air Conversion.

Thanks!