Title: Need help identifying MAF sensor..
Post by: GDawg148 on September 01, 2015, 02:04:06 PM
Post by: GDawg148 on September 01, 2015, 02:04:06 PM
I didn't think this was a stock sensor, but you guys tell me. Wouldn't it say Ford on it?
Who made it? Will it work fine? A friend gave it to me.
Who made it? Will it work fine? A friend gave it to me.
Title: Need help identifying MAF sensor..
Post by: thunderjet302 on September 01, 2015, 03:29:59 PM
Post by: thunderjet302 on September 01, 2015, 03:29:59 PM
I have no idea. Perhaps an aftermarket part. The ONLY factory Ford MAF sensors and housings that are plug a play with a Fox MAF computers are the 55mm housing with the F1ZF sensor (stock on 89-93 5.0 Mustangs) and the 70mm housing (Either the housing stock to 94-95 Mustangs or the housing stock to 94-95 Thunderbirds/Cougars. You can swap the F2VF sensor into the Thunderbird housing so it will work with the factory stock Mustang airbox and tubing.) with the F2VF sensor (all 94-95 Mustang, 92-94 Crown Victoria, Grand Marquis, Town Car). Any other factory Ford MAF will not work without a tune.
Aftermarket MAFs (C&L, PRO-M, PMAS) are calibrated to an injector size by manipulating the signal sent to the computer to scale the airflow for larger injectors. Ford programs the injector size into the computer NOT the MAF. Hence why you can't take a MAF off of a Lincoln Mark VIII with 24lb injectors and expect it to work with 24lb injectors on a 5.0 Mustang.
If you are running 19lb injectors I do happen to have a 70mm MAF with the F2VF sensor sitting in my garage. PM me if you want it as I have no use for it right now.
Aftermarket MAFs (C&L, PRO-M, PMAS) are calibrated to an injector size by manipulating the signal sent to the computer to scale the airflow for larger injectors. Ford programs the injector size into the computer NOT the MAF. Hence why you can't take a MAF off of a Lincoln Mark VIII with 24lb injectors and expect it to work with 24lb injectors on a 5.0 Mustang.
If you are running 19lb injectors I do happen to have a 70mm MAF with the F2VF sensor sitting in my garage. PM me if you want it as I have no use for it right now.
Title: Need help identifying MAF sensor..
Post by: GDawg148 on September 01, 2015, 05:49:25 PM
Post by: GDawg148 on September 01, 2015, 05:49:25 PM
To my friends knowledge, he pulled it off of an 89 5.0 and its stock. So it must be an F1ZF?
Title: Need help identifying MAF sensor..
Post by: TurboCoupe50 on September 01, 2015, 06:54:13 PM
Post by: TurboCoupe50 on September 01, 2015, 06:54:13 PM
Without a Ford part number, it's no doubt aftermarket...
Title: Need help identifying MAF sensor..
Post by: jandmmustangs on September 01, 2015, 07:38:26 PM
Post by: jandmmustangs on September 01, 2015, 07:38:26 PM
Vatozone special
Title: Need help identifying MAF sensor..
Post by: GDawg148 on September 01, 2015, 09:58:34 PM
Post by: GDawg148 on September 01, 2015, 09:58:34 PM
Do you guys think its aftermarket but to be used in place of stock? As in it performs the same as stock?
Title: Need help identifying MAF sensor..
Post by: thunderjet302 on September 02, 2015, 06:35:59 PM
Post by: thunderjet302 on September 02, 2015, 06:35:59 PM
Quote from: GDawg148;450993
Do you guys think its aftermarket but to be used in place of stock? As in it performs the same as stock?
As long as it's the same as the stock one it should. Since there is no part number it's hard to tell.