Side motion in rearend Reply #15 – April 17, 2006, 10:32:28 PM There is wear on the end of the axle where the c clip goes.I am wondering about something called a c clip eliminater.Or replacing the axles.Something called a moser axle.I don't know anything about any of this. Quote Selected
Side motion in rearend Reply #16 – April 17, 2006, 10:56:44 PM i think some side play is normal. every tbird ive had had a little. if you push the car from side to side by the trunk it will go ...plunk, plunk, plunk back and forth... Quote Selected
Side motion in rearend Reply #17 – April 18, 2006, 12:43:57 AM Quote from: shame302i think some side play is normal. every tbird ive had had a little. if you push the car from side to side by the trunk it will go ...plunk, plunk, plunk back and forth...Not mine :D Quote Selected
Side motion in rearend Reply #18 – April 18, 2006, 06:36:57 PM The '84 shop manual says up to .030" endplay is ok.Quote: "Be sure to measure the end play with a dial indicator; not by feel. A guess usually feels like far more end play than there actually is."It is adjusted by making a shim the same shape as the C-washer and intalling it behind the C-washer.Must have a minimum of .005" end play. Quote Selected
Side motion in rearend Reply #19 – April 28, 2006, 01:27:34 PM Does anyone sell the Clutch pack for the 7.5 rearend.Ford charges 200.00 for it.I can buy it for a 8.8 for 54.00 but that will not work. Quote Selected
Side motion in rearend Reply #20 – April 28, 2006, 02:36:16 PM http://www.store.yahoo.com/ratech/fo7axpa1.html Quote Selected