91
92
Engine Tech / Re: Motor mounts
Last post by Chuck W -The RA link I posted in my last post has both hydraulic and solid mounts listed.
93
Engine Tech / Re: Motor mounts
Last post by Ductape91 -I dont know about the 2.3 ones but my original mounts on my 3.8 v6 86 tbird were the hydraulic pedestal type. When i replaced them with the only available replacement, solid type, the motor shook and the car vibrated thru the steering wheel for months afterwards.
94
T-Bird/Cougar Parts & Cars WANTED / Re: 83 Cougar 5.0 fuel sending unit
Last post by Hwycat -95
Engine Tech / Re: Motor mounts
Last post by jcassity -plenty of them on hand under v8 engines
96
Engine Tech / Re: Motor mounts
Last post by Chuck W -Did you save the old motor mounts, especially the bracketry? On the 86-88 you can just replace the isolators.
RockAuto can be kind of screwy on things like this.
They show squat for 86-88 2.3 cars, but plenty for the MN-12 cars, which use the same isolators. You could use any of the mounts listed ROCKAUTO LINK HERE with the stock brackets.
97
Engine Tech / Re: Motor mounts
Last post by jcassity -you may have another issue though if its not firing right.
tell your mech he can pull the codes or you can with just a paper clip or a test light.
98
Engine Tech / Re: cranks no start **Diagosed**
Last post by jcassity -https://youtu.be/Uf1fzSaYl7c
99
Engine Tech / Motor mounts
Last post by salrock54 -100
T-Bird/Cougar Parts & Cars WANTED / Re: 83 Cougar 5.0 fuel sending unit
Last post by Ductape91 -Unless someone has one they can part with you are better off making one from scratch like i had to do.