Looking for stock 5.0 EFI parts

Topic: Looking for stock 5.0 EFI parts (Read 801 times) previous topic - next topic

Looking for stock 5.0 EFI parts

August 06, 2023, 10:22:53 AM

Hey all.

I'm looking for some EFI port injection stuff, like from an 86-93 Mustang.

Interested in stock items. Not looking for anything fancy.

The list:
- Upper and lower intakes (Don't have to be Mustang or Fox, so Tbird, SN-95, etc would be OK)
- Throttle body
- fuel rail and injectors (19#ers would be fine)
- set of stock factory Mustang tubular exhaust manifolds.

Let me know

Thanks!
Chuck

Re: Looking for stock 5.0 EFI parts

Reply #1 – August 06, 2023, 12:09:46 PM

Chuck, I have the headers for sure, *may* have the upper/lower, and likely have the t-body.

I'd have to check to see of I have a rail, I do know I have a set of good 19# injectors for sure though.

Re: Looking for stock 5.0 EFI parts

Reply #2 – August 06, 2023, 12:16:11 PM

Let me know. I'm eyeing a couple things on ebay as well.

I'm just looking for basic STOCK stuff. Just wanting to rid the LTS of the TBI set-up for the time being, as it's 3.7/6R80 is going into another project. (Like I NEED yet ANOTHER project).

Re: Looking for stock 5.0 EFI parts

Reply #3 – August 06, 2023, 12:21:24 PM

Will do. Headed out to the shop now, if you like, I can text or message pics of what I do have.

Re: Looking for stock 5.0 EFI parts

Reply #4 – August 14, 2023, 07:50:29 PM

I think I have what I need for now. (Thanks, Beau!)

I might try and find a harness to pirate stuff from, but I know I'll be building one for the most part.

Re: Looking for stock 5.0 EFI parts

Reply #5 – January 07, 2024, 08:26:45 PM

So, I'm looking for an injector harness for a 5.0.

I thought I was going to need more of a harness, but I can make use of most the CFI harness and just need to deal with hooking up the injectors.

Let me know what you have. Thanks!

Re: Looking for stock 5.0 EFI parts

Reply #6 – January 08, 2024, 04:11:40 PM

We are getting slammed by snow this week, but I will check tomorrow. I think I have 2-3 off 87 cars in storage.

Re: Looking for stock 5.0 EFI parts

Reply #7 – January 17, 2024, 07:15:23 AM

Still looking for an injector harness.

Re: Looking for stock 5.0 EFI parts

Reply #8 – January 25, 2024, 10:16:16 PM

Quote from: Chuck W – on January 07, 2024, 08:26:45 PM

So, I'm looking for an injector harness for a 5.0.

I thought I was going to need more of a harness, but I can make use of most the CFI harness and just need to deal with hooking up the injectors.

Let me know what you have. Thanks!

What year harness?

IIRC I have 3 specific to an 87.

One if them has the mass air conversion hard wired in if you're gonna cam swap.

Re: Looking for stock 5.0 EFI parts

Reply #9 – January 26, 2024, 01:11:10 PM

Here is the EEC IV pinout the 5.0L CFI from the 84 Ford shop manual. May be useful if you want to rework it for SEFI.

Re: Looking for stock 5.0 EFI parts

Reply #10 – January 26, 2024, 11:38:20 PM

I basically just need the harness for the injectors.

This is getting connected to a MegaSquirt, which only has 2 injector banks. I'm going to adapt the injector harness into the old CFI harness that went to the TBI unit. Basically batched like the 85-87 trucks.

(I have all of the wiring diagrams, etc)

I haven't delved into it too much here, as it's an "other" project (The 85 LTS).

I have an OLD EECIV to MS adapter board that I'm using, to just tie the MS unit directly into the existing harness on the CFI 5.0 with a couple modifications on the engine side.

Re: Looking for stock 5.0 EFI parts

Reply #11 – January 30, 2024, 09:16:16 PM

Still looking for an injector harness.

Also will be needing a good TV cable for the AOD, as my current TV rod will not work.

Re: Looking for stock 5.0 EFI parts

Reply #12 – February 09, 2024, 09:35:34 AM

Still looking for both items.