Skip to main content ↑ ↓
Topic: Dynatech headers (Read 1783 times) previous topic - next topic

Dynatech headers

Been looking at these headers, but say they only fit 99-04 mustang. Anyone have a clue if they might work on a Fox bird? Surely dont want Hookers.

http://www.dynatechheaders.com/dr_kmember_ford.html#
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

Dynatech headers

Reply #1 –
What engine do you have?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dynatech headers

Reply #2 –
The '99 to '04 Stangs have a 4.6 modular engine. Nothing in common with ours. Totally different animal.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dynatech headers

Reply #3 –
That part #is for a 351a in a fox body
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

Dynatech headers

Reply #4 –
On the left side click on BBF, these are for BBF in a 99-04.  I guess one link is for 351 or 429-460.  I need to keep checking or call them to see if the might work in a Fox BBF swap.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

Dynatech headers

Reply #5 –
I think Dyna is building BBF headers for Fox, but they are not listed yet. These appear to be Dynatech here in the link and it says 79-93 now available. I will call and confirm.

http://www.teamzmotorsports.net/product_p/headers-mus-bbf.htm
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

Dynatech headers

Reply #6 –
, Dyna quit making Fox BBF headers a yr ago. Called today. But I do have my new K-member Strange coilovers, mounts, spacers on the way.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

Dynatech headers

Reply #7 –
Go to the Corral forum and go to the classifieds. There's an exhaust section. Put a "Wanted" add there and see what happens.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dynatech headers

Reply #8 –
Whats wrong with Hookers headers they're 2".
88 Cougar LS 5.0 .030 over, ported E7s with GT40 valves & trickflow springs, Proform roller rockers, HO cam, removed air silencer, K&N filter, smog pump delete, 2.25" dual flowmasters, Pacestter H-pipe & headers, HO computer, 65mm TB, Explorer intake, 19# injecters, 3.45s, rebuilt posi, and TCI shift kit.

Dynatech headers

Reply #9 –
Quote from: Bruce M;379341
Whats wrong with Hookers headers they're 2".


Many have had nightmares with fitment issues. Im shooting for 2 1/8 primaries. I might sack up and just get some Kooks.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,