Yet another Torque Convertor.... July 23, 2007, 10:03:33 PM I'm putting another torque convertor in the Demon next week....ordered it today. Spoke with the guy and told him all of my mods and my target stall speed of 2800 RPM. My current one stalls at 2400 (specs list it at 22-2600). Wish me luck! Quote Selected
Yet another Torque Convertor.... Reply #1 – July 23, 2007, 10:41:43 PM Luck... But if I was changing mine, I'd go to at least a 3200... Quote Selected
Yet another Torque Convertor.... Reply #2 – July 23, 2007, 10:46:23 PM Paul what RPM range is on your CAM?Cause you want the cam to come on just before the stall speed. Quote Selected
Yet another Torque Convertor.... Reply #3 – July 24, 2007, 08:02:12 PM Quote from: Innes;162962Paul what RPM range is on your CAM?Cause you want the cam to come on just before the stall speed.I agree, ideally 700rpm below peak torque. Slopoke will be getting one too! Quote Selected
Yet another Torque Convertor.... Reply #4 – July 25, 2007, 12:51:59 AM Paul just wondering but what converter did you use? I'm going to upgrade mine at some point and I'm looking to go with about a 2400 stall. I just want a good converter that's not going to blow up on me:hick: Quote Selected
Yet another Torque Convertor.... Reply #5 – July 27, 2007, 11:22:10 AM Peak torque on a TFS stage 1 cam comes on around 3500-3800 depending on advace/retard of the cam, intake manifold, heads, etc. Thunderjet, here's a link to who I used: http://www.protorque.com Quote Selected
Yet another Torque Convertor.... Reply #6 – July 31, 2007, 01:47:45 AM Quote from: V8Demon;163780Peak torque on a TFS stage 1 cam comes on around 3500-3800 depending on advace/retard of the cam, intake manifold, heads, etc. Thunderjet, here's a link to who I used: http://www.protorque.comThanks Paul :D Quote Selected
Yet another Torque Convertor.... Reply #7 – July 31, 2007, 09:51:01 PM They called today and said it was ready, but after working all night and this morning my wife decided to let me sleep. I'll pick it up tomorrow....7/31 -- In my trunk.....gets swapped on 8/8..... Quote Selected
Yet another Torque Convertor.... Reply #8 – August 29, 2007, 05:29:23 PM Just an update.....Still haven't put the new one in.....Waiting for some downtime at my friend's garage so I can use his lift. Hopefully next week. Quote Selected
Yet another Torque Convertor.... Reply #9 – September 21, 2007, 11:50:23 AM ok! It's in.....Along with a whole new exhaust system (including headers) and a tranny crossmember (The old one was cracked almost straight through). There is tire goo all over my neighborhood! Much better! Quote Selected
Yet another Torque Convertor.... Reply #10 – September 21, 2007, 01:24:57 PM Me thinky after the intake swap I should get a 2,400 rpms stall converter next spring:evilgrin: Quote Selected
Yet another Torque Convertor.... Reply #11 – September 21, 2007, 08:33:33 PM then do it Quote Selected
Yet another Torque Convertor.... Reply #12 – September 21, 2007, 10:16:57 PM I don't have the $$$ right now but I will in the spring. Quote Selected
Yet another Torque Convertor.... Reply #13 – September 22, 2007, 12:25:22 PM Quote from: V8Demon;177628ok! It's in.....Along with a whole new exhaust system (including headers) and a tranny crossmember (The old one was cracked almost straight through). There is tire goo all over my neighborhood! Much better!Cool, what's it's stall at now? Quote Selected
Yet another Torque Convertor.... Reply #14 – September 22, 2007, 07:09:23 PM Quote from: thunderjet302;177764I don't have the $$$ right now but I will in the spring.AHEM..... http://www.foxtbirdcougarforums.com/showthread.php?t=15979:D Quote Selected