Brake lines 11inch conversion July 21, 2007, 01:46:15 PM Hey guys I'm currently in the middle of an 11 inch front brake conversion and what I wanted to find out was if I can go ahead and use stainless mustang lines since I'm using mustang calipers. Quote Selected
Brake lines 11inch conversion Reply #1 – July 24, 2007, 07:37:10 AM yes you can but you need an adapter. i know its readily available at napa but i can't remember what size. try a search i saw it a while back or maybe someone will chime in. good luck. Quote Selected
Brake lines 11inch conversion Reply #2 – July 25, 2007, 10:16:02 AM I used napa p/n. 7818 master cylinder adapter 1/4" inverted male to 3/16" inverted female onm the drivers side only. I used the 87-88 tc brake hoses.Here is the link to my thread: http://www.foxtbirdcougarforums.com/showthread.php?t=12780&highlight=TC+ROTORSHope this helps. Quote Selected
Topic: Brake lines 11inch conversion (Read 839 times)
previous topic - next topic
