Skip to main content
Topic: Home Progress (dialup warning) (Read 1248 times) previous topic - next topic

Home Progress (dialup warning)

Pretty excited about getting our electrician back in to finish up the lighting so got some poor night pictures (going to try again with the tripod) of the house with all the lights turned on in the dark. We spared no expense on the lighting and got what we wanted as opposed to just what was required. Lighting isn’t something that is that simple to go back and add light’s unless you don’t mind ripping out drywall. So unlike most contractor built houses where they put the required one light per entry I put two, one on each side of each garage door, one on each side of each sliding door, one on each side of the front door, and one on each end of the front of the house. Plus 4 flood’s up in the gable. The front of this place just GLOWS
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #1
Inside we have recessed lights everywhere in the main living room, loft, kitchen and master bedroom. All on dimmers thank god or I would have to issue sunglasses to visitors at the door. The kitchen also has under the counter Halogen. Anybody remodeling a kitchen I highly recommend those. It put’s the light right where your working instead of behind you where your body is shading it.
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #2
All our windows are done with 1x6 pine. Stained and varnished and wrapping around the bull nosed corners that we did throughout the house. Leanne likes flowers in the windows and in a standard window sill your always fighting to keep from knocking them off when you open the window. These sills won’t have that problem. OR she will just figure she can put larger pot’s there and still have the problem just with a heavier potted plant.
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #3
Last but far from least. I have lights in the Man Cave! car Garage with shop area in the back and storage under the stairs. Like the rest of the place it's a mess but keep in mind this is still a construction site. We have Counters, Flooring, Plumbing, and trim yet to do. Plus a rebuild of my concrete front porch steps that have sunk 2.5 inches from the ground settling since the rain has set in. We expect it to be ready to move in mid January.
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #4
Beautiful home... I love that big garage!

Home Progress (dialup warning)

Reply #5
Nice house. I build for a living, and that is one of the nicer ones I've seen in a while. I especially like the open feel. Can't wait to see more pics. I'll post some of my victorian rebuild pics In another post some day.
I love rec. lighting also.
are you going to do landscape lights also?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Home Progress (dialup warning)

Reply #6
Looking awesome Jim! Let us know when the housewarming is ;)

Home Progress (dialup warning)

Reply #7
Quote from: daminc;193854
Nice house. I build for a living, and that is one of the nicer ones I've seen in a while. I especially like the open feel. Can't wait to see more pics. I'll post some of my victorian rebuild pics In another post some day.
I love rec. lighting also.
are you going to do landscape lights also?

Wow Daminic, thanks for that. I'm very critical of my own work and nit pick my self to death. I know every spot in the house where the knock down texture isn’t PEFECTLY even, or the roofing is a BIT out of align or the sheetrock isn’t PERFECTLY squared up.. and have a tendency to drive my self wacko worrying about it. My wife says “it’s perfect just like that don’t you DARE se that texture off again and do that area over” as I stand there with a trowel in hand grumbling. I got to BS’ing and forgot to knock one of the spare bedrooms down on time and was going to se the whole  room down because it wasn’t the same texture as the rest of the house (I’m not a builder!) to have those words come from a builder makes me feel good about it. I appreciate that!
 
 
It's wired to a switch for a single thread of outside lights, but at this time were just boxing that off until after we move in and actually get some landscaping in.
I failed to mention up in the soffit is also two switched plugs for Christmas lights. (that won’t be going up this year)
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #8
Quote from: Aerobird Motorsports;193857
Looking awesome Jim! Let us know when the housewarming is ;)

Soon as things warm up a bit!!
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #9
Just remember, most people don't see the work that you do the same way. which will make your house nicer than most. I can tell by first sight of a room if it was just done to the good enough level or above.
Something will usually catch my eye in most houses, that could have been better.
I usually do custom higher end quality work in the better neighborhoods. and from those few pics it looks high end.
I'm not really a fan of bull-nose window openings, but it really flows well with the whole open feel.
Post a few more from diff. angles. I'll dig up a pic of something I did recently to show you

Did you do all the work yourself?

Jerry
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Home Progress (dialup warning)

Reply #10
BTW I did notice the texture right away in that one pic with the window
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Home Progress (dialup warning)

Reply #11
We dident do foundation or framing or elect. I sub contracted that out. Even though my nephew does fraiming and gave me a great deal. Then my brother in law is a plumber and he did the plumbing for his cost in materials with no labor charged.
 
I roofed, insulated, drywalled, mud and tape texture paint, installed doors, windows, deck, Cabinets and soon to come flooring and plumbing fixtures myself. On the sideing I had to hire a few guys to help me $800.
 
By "WE" I'm refering to my father, my wife, and myself. My father being retired get's credit for the majorty. He was at it almost every day this summer for 8-10 hours a day. I would be nowhere near as far as I am without him.
 
Here's a pick of the old fart as I decide if I'm going to keep him on, or fire him and find somebody else that will work 10 hours a day for me for free.
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily:

Home Progress (dialup warning)

Reply #12
He sounds like a good guy.
I'll bet you didn't think there was so much that went into building something. esp. on that scale. That ceiling is really, way up there.

I also, put switched outlets up for my christmas lights. lol
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook


Home Progress (dialup warning)

Reply #14
Quote from: daminc;193907
He sounds like a good guy.
I'll bet you didn't think there was so much that went into building something. esp. on that scale. That ceiling is really, way up there.
 
I also, put switched outlets up for my christmas lights. lol

Oooo.. don't even mention the ceiling... had some friends help me out putting the rock up there, 22ft in the air and the  lift would only go 15ft... only to have the inspector come in and say "thats the wrong rock, it all has to come down!"
:shoothead
I put 1/2 inch up on 24inch center rafters and you have to use 5/8 on 24's... 5/8 is weigh's a ton more than 1/2 when your lifting it 22 feet in the air. That whole ordeal was VERY discouraging.
 
Since this last report my Brother in law has been in and finished most of the plumbing. (missing one shower head) So we now have hot and cold running water. I have a little bit of fixing on my front steps (that were concrete until they sank 3inches) that I had to redo out of wood. And then I'm ready to take my first shot at my Final inspection for my Occupancy. Planning on calling for the inspection this coming Friday.
1/18/08
 
For some more Pics go here
http://www.americanhomepartners.com/project_details.asp?project=460
Have a much better night shot of it on there where I used the tripod.
 
Where's those pic's of what you have done Jerry, I'm intristed in seeing them, since I took this on I'm always looking for ideas. lol I find myself at peoples houses checking out there texture when I SHOULD be visiting with them.
:birdsmily:   Objects In Mirror Appear to be Loosing  :birdsmily: