Skip to main content ↑ ↓

Topics

This section allows you to view all Topics made by this member. Note that you can only see Topics made in areas you currently have access to.

Topics - motormenace

3
T-Bird/Cougar Parts & Cars FOR SALE / Selling my 86 Turbo Coupe (need a daily driver ASAP)
I am selling my project do to not enough time, I need another car ASAP, a close place to store it, and not enough money to rebuild it presently. The car has over 200K miles on it. The engine does need to be replaced. The engine over heated from the fan relay burning out. I’m Asking $1600 obo. The car is located in mayland. I will except lower if certain parts are removed. E-mail me if you have any questions.

The car has the following parts on it (but not all listed):
- Aluminum Flywheel w/ Centerforce Clutch
- Big Valve head with ported bowls (oil feed for gauges and turbo are on back of head, side got cracked and is now plugged. Will need to be milled and have new cam bearings)
- ARP Head Studs
- Ford Motorsport A237 Cam
- Esslinger Wide belt kit (crank, aux, and cam) w/Tensioner 
- Esslinger Water Pump and Crank pulleys
- Esslinger Windage Tray
- Chucks Motor Mounts w/Energy Suspension Tranny mount
- Ported E6 Manifold
- 87-88 Intercooler with Forged Bypass Valve
- PE computer with superchip
- Large VAM w/K&N Filter and 35# injectors
- 95 Amp 3G alternator
- Auto Meter Phantom Air/Fuel, Boost, Oil Pressure Guages
- Sony CD Player
- 87-88 hood (extra 87-88 hood comes with car)
- 16” 87-88 wheels on car (need tires)
- URP Firewall adjuster and clutch quadrant
- Hurst Shifter
- 8.8 w/3.55 gears and mustang axels (28 spline and narrower then stock)
- SVO Master Cylinder w/5.0 Mustang Brake Booster
- 11” front brakes with 73 mm calipers
- Poly Bushing in front Control Arms, sway bar, tranny cross member
- Maximum Motorsports Caster/Camber Plates
- Maximum Motorsports Lower Rear Control Arms
- CHE Upper Rear Control Arms

There is more that I can’t remember on the car that is not listed. If you buy the car for the $1600 (or close), the following also go with the car.

- 2002 4.6 Convertible Mustang Springs and shocks/struts
- Chucks rear relocating shock mounts
- Spearco SVO intercooler
- Another Front mount intercooler
- Ranger/Explorer Radiator
- Extra T5 trannys
- Tons of extra parts (will send photos)
4
T-Bird/Cougar Parts & Cars FOR SALE / 86 Turbo Coupe For Sale
86 Thunderbird Turbo Coupe w/ 200,000+ miles. I’m selling my Thunderbird do to no time, no place to work on it, and need money for a daily driver. I love this car and have owned it for over 8 years. The car is rust free (2 small rust spot on the bottom of the rear window (passenger side) and has not been in any accidents. The car will need a new trunk lid (someone broke into the stock truck lock and destroyed it), a better hood (included), brake work, suspension work, and turbo rebuilt (smokes after boost and letting off the gas quickly). I’ll add in extra parts if you pay what I’m asking. Wheels in picture are not included with car. Asking $5,500 obo.  If you have any questions, please feel free to contact me.

- Maximum Motorsports Caster/Camber Plates
- Maximum Motorsports Lower Rear Control Arms
- CHE Upper Rear Control Arms
- Front control arms w/ new Ball Joints and Poly bushings
- Auto Meter Pantom Gauges in center console (A/F, Boost/Vac., Oil Pressure)
- Motorsport A237 Roller Cam
- Ported big valve head
- Remaned PE Comp.   
- Ported E6 manifold
- 87-88 Intercooler w/ TC intercooler
- Forged Bypass Valve
- Gillis Valve
- Big VAM w/ K&N cone filter
- 8.8 TC Rear w/ 3:55 gears and mustang axels and drums
- Esslinger Round Tooth Wide Belt kit
- Esslinger Underdrive pulleys for crank and water pump
- Esslinger Windage tray
- ARP Head Studs
- Hurst/Pro5.0 shifter w/ 35th stang shift
- 87-88 Snowflake Wheels painted Charcoal Grey (need tires)
- Tiny Avenger Valve Cover Breather
- JVC CD player
- SVO Seats (need recovering)
- 190 lb. Fuel Pump
- T3 w/ SVO housing and .63 ext.
- AN Fittings for oil feed and turbo coolant
- KYB Shocks and Struts (87-93 mustang), Koni Quad Shocks
- Aluminum flywheel and Centerforce Dual Friction Clutch
- 3” Downpipe (no cat) w/2.5 cat back with flowmaster (non mandrel bent)
- 11” front brakes w/73mm Front Calipers
- SVO Master Cylinder and 5.0 Mustang Brake Booster


Parts that come with the car…..

- Spearco SVO Front Mount intercooler
- T3/T4 60 trim comp/Stage 3 ext (rebuilt with 360 trust bearing and overlap ext seal)
- Extra SVO T3 parts
- 2 Extra sets of 35lb injectors
- Intake with Custom Rotated Upper w/ 65mm Throttle Body
- 87-88 Koni  Struts (one needs rebuild)
- Extra Interior Trim
- Stock Turbo Head
- Extra Snowflake wheels (tires shot)
- 83-86 Aluminum Spare (for 10” brakes, not sure if it fits 11’s)
- 94-95 Mustang Throttle Body (Drilled for Nitrous)
- Extra Engine Hardware and Parts
- Drive Shaft and Lakewood Drive Shaft Loop
- MSD 6AL (Remand)
- Marchel Fog Lights and Covers
- Power Stroke Intercooler Pipes
- Stock SVO Mustang Intercoolers
- Stock Intakes and Valve Covers
- 2 5/8” Phantom Auto Meter Fuel Pressure Gauge w/Isolator and Pod
- Ford Upper Rear Bushings
- Braided Front Bake lines


Extra Parts for the full amount…..

- SVO PE Computer w/ Superchip
- 15x7 5 Lug Mustang “Tri-Spoke” Wheels
- 235/60 R15 BF Goodrich Drag Radials
- Large Front Mount Intercooler w/Explorer Radiator
- 2 2.3 Short blocks (need rebuilds) w/1 Engine Stand
- SVO Performance Stickers (adds 5 horsepower! LOL!)
- Any Extra 2.3/Turbo Coupe part left…..which is more then I can list!!!
5
Suspension/Steering / Addco Sway Bars
Is anyone using these? I'm looking at either a replacement or an upgrade. There is a listing, but haven't heard much about them being used.
6
Lounge / F!@king Auxiliary Shaft!!!!AGAIN!!!!
Well, I destroyed another one today! Though, I not destroying the Aux shaft that much, but I'm removing half the teeth on the distributor. I'm going to try to replace the oil pump, Aux, and distributor tomorrow or Monday.....
8
Lounge / F!@king Auxiliary Shaft!!!!
Well, I thought that the turbo was going in my Thunderbird again, but I was wrong! On the way to work, the 2.3 decided to eat a auxiliary shaft on the way to work! Well, I guess that it my be time for an Esslinger Aux shaft now (for the record, every 2.3 I've own has eaten at least 1-2 of these  things!!!!)
11
Electrical Tech / 3G into 86 Turbo Coupe
Ok, I searched, but didn't find anything. Has anyone done this swap? It's the same as and 83-86 Thunderbird/79-86 Mustang Alt. swap.
12
Lounge / hey chuck w!
chuck, i was looking at the pics of the 83 and i was wondering why you are not running an intercooler? also, what engine management are you running for the swap to the 2.3?
13
Miscellaneous For Sale/Wanted / wrecked 90 mustang GT w/ parts
i need to move by the end of april so i'm selling my 90 mustang that is wrecked. it comes with a new front clip, koni reds, 5 lug conversion with svo wheels, and most of the parts to fix it. asking $1,600 obo.