Skip to main content
Topic: going to the track!!!! looking for 11.3.... (Read 2967 times) previous topic - next topic

going to the track!!!! looking for 11.3....

ok, I am going to the local strip tomorrow, I would like for it to run better then my 11.4 but it was 40* last time I went. I am going to take out my passenger seat, back seat and anything else I can unbolt:mullet:. WISH ME LUCK!!!!
Pictures and videos to come!!!!
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

going to the track!!!! looking for 11.3....

Reply #1
good luck.
88 Cougar LS 5.0 .030 over, ported E7s with GT40 valves & trickflow springs, Proform roller rockers, HO cam, removed air silencer, K&N filter, smog pump delete, 2.25" dual flowmasters, Pacestter H-pipe & headers, HO computer, 65mm TB, Explorer intake, 19# injecters, 3.45s, rebuilt posi, and TCI shift kit.

going to the track!!!! looking for 11.3....

Reply #2
I have to hang my head in shame...... I could not get the car any faster, I ran it 8 times in 2 hours(90*) no one showed up lol.I ran 11.6 6 times and one 11.7 and one 11.9, on those two runs it felt like it was running out of gas??? maybe since it was so hot.I guess i'll wait till the winter, but might have the tremec 3550 in by then.
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

going to the track!!!! looking for 11.3....

Reply #3
Seems like good times to me?  It was pretty hot.
Mike

going to the track!!!! looking for 11.3....

Reply #4
Here are some vid's and some pic's, yes I did see the light!!!! don't hate on my burnouts trying to keep the tranny cool and thats all I need, I guess

1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

going to the track!!!! looking for 11.3....

Reply #5
Still awesome times. :) I can only dream of having my Thunderbird that fast.
[SIGPIC][/SIGPIC]
'86 Turbo Thundercat (Cougarbird)
'02 TrailBlazer LT 4x4
'08 Chevy Cobalt

going to the track!!!! looking for 11.3....

Reply #6
It had to be great fun to get all those runs in!

Looks like your 60' times were soft.  The MPH look great, particulaly when you consider how hot it was.

Going with a manual can help it launch harder.  Usually takes a bit of a learning curve to dial it in...

going to the track!!!! looking for 11.3....

Reply #7
Quote from: 86T-bird;358924
It had to be great fun to get all those runs in!

Looks like your 60' times were soft.  The MPH look great, particulaly when you consider how hot it was.

Going with a manual can help it launch harder.  Usually takes a bit of a learning curve to dial it in...

 
I know, I will be pissed if the car runs slower after all that work. That's why im going to have my 150lbs buddy race it first, lol
This is what he practices on, lol http://www.blowbyracing.com/robmollet.html
http://www.musclemustangfastfords.com/events/mmfp_0607_fun_ford_weekend_drag_race/photo_26.html
He hasn't raced much since tyler was born, but im sure he'll do fine.
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

going to the track!!!! looking for 11.3....

Reply #8
Quote from: 347Thunder;358935
I know, I will be pissed if the car runs slower after all that work. That's why im going to have my 150lbs buddy race it first, lol
This is what he practices on, lol http://www.blowbyracing.com/robmollet.html
http://www.musclemustangfastfords.com/events/mmfp_0607_fun_ford_weekend_drag_race/photo_26.html
He hasn't raced much since tyler was born, but im sure he'll do fine.


Now that's a great plan and it should really shorten the learning curve!

going to the track!!!! looking for 11.3....

Reply #9
the only thing is I will never run it faster then him, first he weighs almost 100lbs less then me, and he can drive better lol
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/