Skip to main content ↑ ↓
Topic: 408 stroker project (Sold 4/2020) (Read 109302 times) previous topic - next topic

408 stroker project (For Sale 5/2018)

Reply #300 –
Almost there. Just in time to put it away for the winter :hick:
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

408 stroker project (For Sale 5/2018)

Reply #301 –
Lol, yeah I know.. I'm hoping to put a couple hundred miles on it before the end of the year.
[SIGPIC][/SIGPIC]

408 stroker project (For Sale 5/2018)

Reply #302 –
I hope everyone has been well on the forum, it's been a couple years.  I decided to finally call it quits with the cougar.  The car is for sale and I'm currently taking offers.  I'll leave it up here for about a month if no bites I'll post on mustang sites and other sites and will probably part it out. 

All the pictures and what has been done is in this thread.  I'll try and sum everything up in a single post in a week or so, just really busy right now.
[SIGPIC][/SIGPIC]

408 stroker project (For Sale 5/2018)

Reply #303 –
You took one look at Binary Editor and your head started spinning right?
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

408 stroker project (For Sale 5/2018)

Reply #304 –
Quote from: ZondaC12;465974
You took one look at Binary Editor and your head started spinning right?

You could use another XR7.......

BTW where the hell do you store all those Cougars? Or find the time to drive them?
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

408 stroker project (For Sale 5/2018)

Reply #305 –
Lou you sunnnnuva....biiitch (I'm sure you get the reference ;))

This is my garbage can.    Long story. (I need that light blue colored eyes rolling around gif-smiley from The Corral...)
And as far as time, yeah there's not much lol

X
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

408 stroker project (For Sale 5/2018)

Reply #306 –
Is that the garage attached to your house?
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

408 stroker project (For Sale 5/2018)

Reply #307 –
It's got an apartment upstairs. I did it it the stupid way, from a not-getting-bent-over-with-taxes standpoint.
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

408 stroker project (For Sale 5/2018)

Reply #308 –
Quote from: ZondaC12;466002
It's got an apartment upstairs. I did it it the stupid way, from a not-getting-bent-over-with-taxes standpoint.


Apparently I am not as committed as you. I like a full size house ;)

/end thread derail
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

408 stroker project (For Sale 5/2018)

Reply #309 –
Nice job!!! You'll be all over the news. Oh the humanity!!

Bob, hope you are well too. Good luck with whatever direction you choose.
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

408 stroker project (For Sale 5/2018)

Reply #310 –
thats a serious garage Zonda.  I recently got a large promotion at work so I'm pretty sure I'm not going to have time for cougar,  honestly I lost interest in the working on cars anymore.  I'd really like to see it go to someone here on the forum.  I'm not looking for a ton of money for it. 

I'm firm at $4500 for the cougar and everything I got will go with it ( tbird/cougar specific parts).  Any less than that I'll just store it for couple more years,  and try to get into the hobby again.. but it's been 9 years so it's safe to say I'm out lol.

If anyone is interested give me a call at 215-485-2903
[SIGPIC][/SIGPIC]

408 stroker project (For Sale 5/2018)

Reply #311 –
Bob-
Can you make a post in the For Sale section for this?

You can link to this thread for details on the car/build, but I'd rather have any discussions regarding selling, etc. done in the proper section.

Thanks.
Long live the 4-eyes!  - '83 Tbird Turbo

408 stroker project (For Sale 5/2018)

Reply #312 –
np thanks chuck
[SIGPIC][/SIGPIC]