Skip to main content
Topic: Lookie what I got!!!!! (Read 2506 times) previous topic - next topic

Lookie what I got!!!!!

This is a tremec 3550, I got it off craigslist for $900 came with tranny, bellhousing, zoom clutch (2 stickers):shakeass:, crossmember, yoke not a bad deal since just the tranny sells for $1,300 on ebay. Now I just need to get an aluminum flywheel, clutch quadrant, and shifter
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Lookie what I got!!!!!

Reply #1
little extra
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Lookie what I got!!!!!

Reply #2
I'll give you a shiny quarter for it!?  :D
...and there was light!

Lookie what I got!!!!!

Reply #3
geez got lucky on that deal!
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com

Lookie what I got!!!!!

Reply #4
which one????:D
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Lookie what I got!!!!!

Reply #5
Quote from: T-BirdX3;334500
I'll give you a shiny quarter for it!?  :D


which one????:D
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Lookie what I got!!!!!

Reply #6
Quote from: 347Thunder;334503
which one????:D


A shiny quarter for each! And I will even pay for the shipping to get it to my house!  :D
...and there was light!

Lookie what I got!!!!!

Reply #7
Lucky!..

Lookie what I got!!!!!

Reply #8
good score!!

and you will have it in when?? late sunday?? lol
1985 TC (yet another one) Fully loaded
has 225k mile  still with the factory head gasket






84  Turbo ranger  Daily driver  ($800.00 Ebay deal)
          volvo FMIC and more getto rigging than the law should allow

Lookie what I got!!!!!

Reply #9
is that red RTV on the rear tailhousing..... were you able to get some sort of history on the trans....

looks like a good score...

Lookie what I got!!!!!

Reply #10
The T-5 uses sealant there as well. Great score,I'm glad for you.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Lookie what I got!!!!!

Reply #11
Quote from: no911forme;334513
is that red RTV on the rear tailhousing..... were you able to get some sort of history on the trans....

looks like a good score...


yeah, tremec uses this red non hardening goop.
I was told told buy the guy that bought it that the guy he bought it from wanted to spray his stang with a 250 shot and did not want to break his 3550 so he sold it to buy a tko 600. the box this came in was a box for a tko 600 so the story lines up but you never really know till you put some power to it.:mullet::burnout:
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Lookie what I got!!!!!

Reply #12
Quote from: vinnietbird;334514
The T-5 uses sealant there as well. Great score,I'm glad for you.


vinnie, you say the sweetest things:barf:
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

Lookie what I got!!!!!

Reply #13
You might want to think about a scatter shield with how much power you have.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Lookie what I got!!!!!

Reply #14
Quote from: Haystack;334565
You might want to think about a scatter shield with how much power you have.


I think like 450 crank hp, I was thinking of that but have not found one at the price.lol
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/